I can compensate for the level at the destination of the signal.

This is what I asked the AV123 group on the Rockets and the RDES that I have:

Running an Outlaw 990 (Pre/Pro) to an Outlaw 7700 (AMP) (connected via Balanced cables). 990 is also connected to the Sub via Balanced Cable. 7700 then goes to RS1000's using a high level output from the amp. At the speaker I have the jumper from the high level input to the plate amp for the woofers in the speakers.

I'm thinking of taking the Low Unbalanced out of the Pre, and going directly to the Low level input of the plate amp on the RS1000's with the RDES in the line.

Subwoofer would still not have an RDES.

Worth the trouble of all that would be involved?