I don't know if it should matter, but I'm using coax from my CD. Is anybody able to make the stereo mode (as opposed to a DPL2 or DTS surround mode) not send the full frequency to the front speakers? With my 950, with the fronts set to small and the crossover either 40 or 150 Hz, the speakers get the FULL frequency range, just like they would with the speakers set to large.

The DPL2 and DTS modes appear to work fine, but the stereo mode sends the full frequency range to the front speakers, even when the fronts are set up as small. The subwoofer is STRONGLY affected by the crossover point in stereo mode, but the front speakers don't seem to be affected. You can physically turn your sub off and see if you hear the same thing.


[This message has been edited by Will (edited July 08, 2002).]