Here are the menu screens:

Main Menu

Input Config
Speaker Config
Channel Calib
Channel Trim
System Config
Multi-Zone
PL2 Music Parameters
Exit

----------
Input Config

Source: DVD
Input: Coaxial 1
Mode: PL2
Music
Treble: 0dB (+/- 6dB, by 2dB increments)
Bass: 0dB
Night: No Comp (DR Comp 1 to 4)
Return to Main Menu

----------
Speaker Config
Front: small/large
Center: small/large/none
Surr: small/large/none
Surr Rear: LB/RB bs(LB) none
Sub: on/off
front Xover: 40/60/80/120/150 Hz
center Xover: 40/60/80/120/150 Hz
surr Xover: 40/60/80/120/150 Hz
Return to Main Menu

----------
Channel Calib
left front: 0 dB (-15 to +10 dB, by 1 dB)
center front: 0 dB (or none)
right front: 0 dB
right surr: 0 dB
right back: 0 dB (or none if you only have one back speaker)
left back: 0 dB
left surr: 0 dB
subwoofer: 0 dB (or none)
Return to Main Menu

----------
Channel Trim

All the same entries as Channel Calib.
The difference is that in Trim mode, you
can hear your source playing. In Calib,
you get white noise.


----------
System Config
front distance: 13 feet (0 to 20')
center distance: 11 feet
surr distance: 10 feet
VFD brightness: half/full
OSD Timeout: 3/5/10/15/20/25/30 seconds
Sleep Timer Set: 0/5/10/20/30/40/50/60 min
Theater Compen: on/off
Distance Units: feet/meters
Return to Main Menu

----------
Multi-Zone
Multi-Zone: on/off
Input: CD
Mute: on/off
Volume: -21 dB
Return to Main Menu

----------
PL2 Music Parameters
Panarama: on/off
Dimension: step 0 (+/- 3)
C width: step 5 (0 to 7)

Return to Main Menu
------------

There are some other hidden things - like if you press and hold the DD button, you can switch between a locked setting and an auto setting. I'm waiting for the manual to find out how auto works.

Also, some menu choices are disabled in some situations - although they're not greyed out. For example, you can't turn off the sub if you tell it you have any small speakers. And you can't adjust the night compression if you're in certain processing modes.



------------------
JeffLH