If you are pulling down a peak, I wouldn't worry much about the Q - my understanding is that the only case to be cautious about is when you are applying boost to the signal, and in your case the only EQ channel that you are applying any increase to is the 20Hz EQ, which is 8Hz away from the next slider. Granted, the Q on that channel is pretty low (so it affects a wide area), but the next EQ is also carrying a relatively low Q and is getting pulled down 13dB.

The only thing I might suggest would be to play a bit more with the 20Hz slider - it is at the point where the LFM-1's are starting to roll off naturally, so if your response curve starts to dip around here it isn't necessarily a problem.