Thanks Gonk,
Per the 990 manual, I have the f/l/c crossover set to 40 and the rears set to 80. Also, per the manual, I have set the sub to LFE.

Here are the specs for my l/r (I don't really know what the range means):

Freq. Response 38Hz - 22kHz ±3dB on reference axis
Freq. Range -6dB at 30Hz and 50kHz

Center:
Freq. Response 42Hz - 22kHz ±3dB on reference axis
Freq. Range -6dB at 35Hz and 50kHz

Rears:
Freq. Response 49Hz - 22kHz ± 3dB on reference axis
Freq. Range -6dB at 40Hz and 42kHz

Would you say I have the correct crossover settings? Perhaps I should raise the center and lower the rears?

Also, during DVD playback, should I not be using PLII Movie? What should I be using?

Thanks again.

Quote:
Originally posted by gonk:
If the mains are set to large, the default is for the sub to be set to LFE (at which point it'll get the LFE track on 5.1 sources as well as bass redirected from small speakers in the system). The other option for the sub is L/R+Sub, which does the same thing except it sends a copy of the left and right channels below the left/right crossover to the sub (so you get that bass signal twice).