OFCCM -- There is a reset button tucked under the 950's volume knob, too. It is included in the event that the 950 locks up and cannot be reset by unplugging it. From page 45 of the manual (Yes, I have flipped through the 950's manual a
few times...
):
To reset the unit you must first remove the volume control knob on the front panel by grasping it and gently pulling the knob straight out towards you. When the knob is removed you will see a very small hole in the black aluminum front panel at the “nine o’clock” position. With the unit on, use a toothpick or unfolded paper clip to gently press the button behind the opening. Hold the button for a second and then release it. This should reset the system.
Replace the volume control knob, being careful to line up the flat surface on the control shaft with the matching flat surface on the inside of the knob. Push the knob straight on to the shaft until it is firmly seated.
If the manual reset does not solve the problem, contact Outlaw Audio for further advice.
------------------
gonk -- Saloon Links |
Pre/Pro Comparison Chart |
950 Review 
Previous Topic
Index
