Quote:
Originally posted by tekdredger:
One pair is hot and one pair is ground. It doesn't matter which pair you use, they are the same from an engineering standpoint. For example, tie both blue wires together and solder to the center pin of the rca and solder both white wires to the ground terminal. The overall shield wire is also soldered to the ground terminal but only at one end of the cable...trim it back and leave it unterminated at the other end. See this link for further discussion of directional cables and shielding: http://ubb.outlawaudio.com/ubb/Forum14/HTML/000089.html
Hope this helps.