Well, so far I have been loving the Oppo w/ my 970...
Today though, I tried hooking up the Oppo w/ the 7.1 analog output, instead of the digital Coax like I was running.
First thing that goes wrong. After setting up everything as far as speaker set-up in the Oppo and letting the 970 know what type of signal was coming in, VERY little low-end came out of my LFM1-EX. Other than the analog signals, I made no changes to the SMS-1 or anything else. (I tried all three settings on the bypass to no avail)
2nd, when I try switching back to the coax to see the difference, I have to turn the volume up by about 20-25 db from where it was before, and again, very little action out of the sub.
Any ideas?
_________________________
Speakers Mains: Ninja Master Polk LSi9s Center: Ninja Master Polk LSiC Surround Sides: Slightly Modded Polk LSiFXs Surround Rears: X-over+ Modded Polk LSi7s Subs: Outlaw LFM-1 EX and Polk 505 Electronics Sherwood R-972 (Waiting for the Outlaw (9XX) Outlaw 7700 Amp Oppo BDP-103 Signal Cable, Advanced Technology, and Outlaw Audio Cables 2 APC H-15s and an UberBUSS for good measure