I think to answer your question directly, no, because the 200's don't have level adjustments on the inputs so you can equalize the power differential of the Integra to the 200's. Couple this with any phase delay that might occur and you could end up with signals that are out of phase and over powered on the lows. Of course, there are devices that can phase correct and level set the input for you, but they will not work in these set up because if you needed to delay the signal, it would be the one your powering off the Integras and since the signal path is longer thru the 200, you need to delay the Integra path.

The phase may not even be apparent, but the signal level adjustment I would bet you will notice and want to be able to adjust. Your better off either finding a way to adjust the level of this signal and try it out that way. With the return policy on the 200's, give it a shot, your only out the shipping costs to send it back.