I'm hoping someone can help me out with this. I bought a Sony KV-32FS10 from a friend and immediately had to make repairs when the set wouldn't turn on--just that flashing red light on the front. No problem, the friend and I worked it out.

250 bucks later, the service people had replaced something called the IC355 (part number A-1298-890-A).

Got the TV back and the picture is distorted, bending inward vertically on the left side, increasing toward the top left corner of the screen. Not fish-eye severe but noticeable when there are vertical graphics, etc.

So my question is, should the repair people have recalibrated the TV after installing this part? They didn't. Searching on the web, it seems that this may be necessary. I've tried to get the TV into the service mode to do it myself, but haven't been able to. Any thoughts would be greatly appreciated.

Oh and one more thing, I've disconnected everything (including the Outlaw 1050)and the distortion is still there with an antenna connected.