Outlaw Audio home shop products hideout news support about
Topic Options
#98744 - 02/11/20 04:30 PM LOUD NOISE
ejspain Offline
Gunslinger

Registered: 11/03/16
Posts: 15
Loc: Texas
PLEASE HELP!!! Just added the 976 to my system. When I fire up the system, I get the loudest, screeching sound through just the right channel speaker. It lasts about 2 seconds (just enough to sound like it damaged my speakers) then it stops but leaves behind an annoying hum (only in the right front channel). At first I thought it could be a bad trigger cable so I removed and still the same horrible screech.

Process of elimination:
1. Checked speaker wire connection (all good)
2. Removed 7700 from the Panamax and plugged into the wall (same result)
***mind you each time I'm having to turn on the system only to hear this noise, then turning off fast as I can***
3. Removed the 976 from the Panamax and plugged directly into the wall (same result)
4. Tried a different (known good) interconnect between the 976 and 7700 (same result)

Another issue - I'm connected from my 4k TVs ARC port to ARC port of the 976. The processors is receiving the TV information because I get a picture but no sound.

I pray this isn't a sign of needing another AMP.
_________________________
SAMSUNG 85” Q7-Series 4K Ultra HDR QLED TV
Outlaw 7700
Outlaw 976
Martin Logan Impression ESL 11A - L/R Front
Martin Logan ElectroMotion ESL - C
4 Martin Logan Edge In-Wall 7.1 Surround
Martin Logan BalancedForce 210 (Sub)
Oppo BDP-105 - (Limited Music Play)
Plex Media Server (All 4k/UHD, Blu-Ray Content, Music Library, LiveTV)
1 Panamax Max 5400 Power Conditioner (for electronics)
3 Furman M-10X E Power Conditioners (Front R/L, Center Martin Logans)
Outlaw Audio PCA Interconnects
Blue Jean BJC 12 White Speaker Cable
AcoustiMat Sound panels and bass traps

Top
#98746 - 02/11/20 06:35 PM Re: LOUD NOISE [Re: ejspain]
rdgrimes Offline
Gunslinger

Registered: 10/31/14
Posts: 45
Swap speaker wires to see if the noise moves over. Then swap the input cables on the amp to see if its the pre-amp or amp causing it.

Top
#98747 - 02/11/20 06:37 PM Re: LOUD NOISE [Re: rdgrimes]
ejspain Offline
Gunslinger

Registered: 11/03/16
Posts: 15
Loc: Texas
Good idea
_________________________
SAMSUNG 85” Q7-Series 4K Ultra HDR QLED TV
Outlaw 7700
Outlaw 976
Martin Logan Impression ESL 11A - L/R Front
Martin Logan ElectroMotion ESL - C
4 Martin Logan Edge In-Wall 7.1 Surround
Martin Logan BalancedForce 210 (Sub)
Oppo BDP-105 - (Limited Music Play)
Plex Media Server (All 4k/UHD, Blu-Ray Content, Music Library, LiveTV)
1 Panamax Max 5400 Power Conditioner (for electronics)
3 Furman M-10X E Power Conditioners (Front R/L, Center Martin Logans)
Outlaw Audio PCA Interconnects
Blue Jean BJC 12 White Speaker Cable
AcoustiMat Sound panels and bass traps

Top
#98748 - 02/11/20 06:46 PM Re: LOUD NOISE [Re: ejspain]
ejspain Offline
Gunslinger

Registered: 11/03/16
Posts: 15
Loc: Texas
I think it's the R AMP channel....I switched with the left cable which didn't give me the noise and WHAM its back
_________________________
SAMSUNG 85” Q7-Series 4K Ultra HDR QLED TV
Outlaw 7700
Outlaw 976
Martin Logan Impression ESL 11A - L/R Front
Martin Logan ElectroMotion ESL - C
4 Martin Logan Edge In-Wall 7.1 Surround
Martin Logan BalancedForce 210 (Sub)
Oppo BDP-105 - (Limited Music Play)
Plex Media Server (All 4k/UHD, Blu-Ray Content, Music Library, LiveTV)
1 Panamax Max 5400 Power Conditioner (for electronics)
3 Furman M-10X E Power Conditioners (Front R/L, Center Martin Logans)
Outlaw Audio PCA Interconnects
Blue Jean BJC 12 White Speaker Cable
AcoustiMat Sound panels and bass traps

Top
#98749 - 02/11/20 06:47 PM Re: LOUD NOISE [Re: ejspain]
ejspain Offline
Gunslinger

Registered: 11/03/16
Posts: 15
Loc: Texas
I think it's the R AMP channel....I switched with the left cable which didn't give me the noise and WHAM its back. CRAP CRAP CRAP....I was NOT ready to buy another AMP!!!


Edited by ejspain (02/11/20 06:49 PM)
_________________________
SAMSUNG 85” Q7-Series 4K Ultra HDR QLED TV
Outlaw 7700
Outlaw 976
Martin Logan Impression ESL 11A - L/R Front
Martin Logan ElectroMotion ESL - C
4 Martin Logan Edge In-Wall 7.1 Surround
Martin Logan BalancedForce 210 (Sub)
Oppo BDP-105 - (Limited Music Play)
Plex Media Server (All 4k/UHD, Blu-Ray Content, Music Library, LiveTV)
1 Panamax Max 5400 Power Conditioner (for electronics)
3 Furman M-10X E Power Conditioners (Front R/L, Center Martin Logans)
Outlaw Audio PCA Interconnects
Blue Jean BJC 12 White Speaker Cable
AcoustiMat Sound panels and bass traps

Top
#98750 - 02/11/20 06:58 PM Re: LOUD NOISE [Re: ejspain]
ejspain Offline
Gunslinger

Registered: 11/03/16
Posts: 15
Loc: Texas
PLUS....I disconnect what I think is either a bad channel or cable....NO NOISE...but I still can't get ANY sound out of the system.

I can't believe this but is this a sure indication I have a DEAD AMP??
_________________________
SAMSUNG 85” Q7-Series 4K Ultra HDR QLED TV
Outlaw 7700
Outlaw 976
Martin Logan Impression ESL 11A - L/R Front
Martin Logan ElectroMotion ESL - C
4 Martin Logan Edge In-Wall 7.1 Surround
Martin Logan BalancedForce 210 (Sub)
Oppo BDP-105 - (Limited Music Play)
Plex Media Server (All 4k/UHD, Blu-Ray Content, Music Library, LiveTV)
1 Panamax Max 5400 Power Conditioner (for electronics)
3 Furman M-10X E Power Conditioners (Front R/L, Center Martin Logans)
Outlaw Audio PCA Interconnects
Blue Jean BJC 12 White Speaker Cable
AcoustiMat Sound panels and bass traps

Top
#98754 - 02/13/20 07:14 PM Re: LOUD NOISE [Re: ejspain]
XenonMan Offline
Desperado

Registered: 04/08/08
Posts: 2676
Loc: Columbus,North Carolina
With the right channel input disconnected the amp still puts the noise to your right speaker? If it does it is the amp if it doesn't the 976 is the issue or the cable to the amp from the 976. Also make sure the signal cable is not running parallel very close to a power cable.
_________________________
Music system
Model 990/7500/Magnepan 1.6 QRs/Technics SL1200 MK2/Aperion S-12 Subwoofer/OWA3/Sony NS75H DVD
APC H15 Power Conditioner

TV System
Large Advent Loudspeakers/ Polk center/Monoprice surrounds/Panasonic Viera 42 inch/Onkyo HT-RC260/Sony BDP S590/Directv


Home Theater System
Onkyo PR-SC886/Outlaw 7125 Klipsch RF-82 L/R,RC-62 center, RB-35 SR/SL, BENQ HT1075, Outlaw LFM1-EX/OPPO BDP-83/Directv
Harmony ONE
Blue Jeans and Monoprice interconnects
APC H15 Power Conditioner

Top
#98755 - 02/13/20 07:15 PM Re: LOUD NOISE [Re: ejspain]
XenonMan Offline
Desperado

Registered: 04/08/08
Posts: 2676
Loc: Columbus,North Carolina
With the right channel input disconnected the amp still puts the noise to your right speaker? If it does it is the amp if it doesn't the 976 is the issue or the cable to the amp from the 976. Also make sure the signal cable is not running parallel very close to a power cable.
_________________________
Music system
Model 990/7500/Magnepan 1.6 QRs/Technics SL1200 MK2/Aperion S-12 Subwoofer/OWA3/Sony NS75H DVD
APC H15 Power Conditioner

TV System
Large Advent Loudspeakers/ Polk center/Monoprice surrounds/Panasonic Viera 42 inch/Onkyo HT-RC260/Sony BDP S590/Directv


Home Theater System
Onkyo PR-SC886/Outlaw 7125 Klipsch RF-82 L/R,RC-62 center, RB-35 SR/SL, BENQ HT1075, Outlaw LFM1-EX/OPPO BDP-83/Directv
Harmony ONE
Blue Jeans and Monoprice interconnects
APC H15 Power Conditioner

Top

Who's Online
0 registered (), 117 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Hedoboy, naowro, BeBop, workarounder, robpar
8705 Registered Users
Top Posters (30 Days)
patm1198 1
Helson 1
Forum Stats
8,705 Registered Members
88 Forums
11,326 Topics
98,691 Posts

Most users ever online: 476 @ 12/28/22 08:54 PM