#6557 - 11/07/06 12:28 PM
Mini DVD to standard size DVD adapter
|
Gunslinger
Registered: 01/04/06
Posts: 18
Loc: North Carolina
|
I have recorded some mini DVD disks on a camcorder. I can't play the small DVD in the vertical DVD player. Is there an adapter you can buy to load the small DVD into the vertical DVD players, so they can play? I have a SONY DVP-CX995V DVD/CD player.
|
Top
|
|
|
|
|
#6558 - 11/07/06 01:01 PM
Re: Mini DVD to standard size DVD adapter
|
Desperado
Registered: 09/02/02
Posts: 615
Loc: Northern Garden State
|
I had never even heard of Mini-DVD before reading your post. So, I googled it. Here are two suggestions for you after reading an article online:
1) Are you sure the mini-DVD disc from the camcorder is finalized? You may have to put it back into the camcorder to check this.
2) Can your computer read the mini-DVD disc? If so, you may be able to transfer the material onto your computer and then burn a regular DVD-R.
It may be that your Sony DVD player just can't read the mini-DVD discs. Unfortunatley, format incompatibility happens. Hope this helps..
|
Top
|
|
|
|
|
#6559 - 11/07/06 01:22 PM
Re: Mini DVD to standard size DVD adapter
|
Desperado
Registered: 03/21/01
Posts: 14054
Loc: Memphis, TN USA
|
I don't know of an adapter, although there should be some adapters around for the old mini CD's (like this one ). If that works with a DVD, that's going to be the only way for your changer to handle these discs, but I didn't find any marketed for DVD so there may be issues with compatibility even with one. In that case, the best bet may be what Jason suggested - use a computer to transfer the data from mini-DVD to standard 5" DVD. The bright side here is that you could probably fit two mini-DVD's worth of content onto a single standard DVD. This would also be good for leaving the discs in the changer long-term (cheaper and more reliable than a bunch of those adapters). If you are just checking the discs before archiving to 5" DVD, you might even consider a cheap (and it could be real cheap if you wanted it to) single-disc player to supplement the changer.
|
Top
|
|
|
|
|
#6560 - 11/07/06 01:27 PM
Re: Mini DVD to standard size DVD adapter
|
Gunslinger
Registered: 01/04/06
Posts: 18
Loc: North Carolina
|
I did format the disk and it does play on other players. I have a DVD burner and did re-record the material and that works, but I don't want to do that unless I have to, editing is a pain. I've called music stores and that's the only solution they gave too. I'm hoping that one of you smart guys will invent an adapter.
|
Top
|
|
|
|
|
#6561 - 11/07/06 01:40 PM
Re: Mini DVD to standard size DVD adapter
|
Desperado
Registered: 03/21/01
Posts: 14054
Loc: Memphis, TN USA
|
If you have a DVD burner, you may want to look into software like this . I've used it with home video transferred from MiniDV (although I have to use an MPEG converter) - if you are starting with a non-commercial DVD (such as what your camera creates), you could fairly easily combine content from multiple discs into a single 5" DVD along with pretty nice menus. It would just be a matter of copying the finalized 3" DVD's to a hard drive, using a wizard to load each into the program, and defining as simple or complex a menu as you want (and no menu is an option). I used an older version to create my Devious Tiny Disc . Granted, a license for it will cost more than a cheap DVD player, but it'd end up costing less than a bunch of those CD adapters (assuming they even work in your changer) and the 5" discs could be made pretty quickly.
|
Top
|
|
|
|
|
#6562 - 06/16/09 12:10 AM
Re: Mini DVD to standard size DVD adapter
|
Deputy Gunslinger
Registered: 06/14/09
Posts: 7
Loc: LA
|
if anyone knows of where an adapter like this is available I'd love to know. I'm still unable to get video from my camera into my Mac. I've looked everywhere for this adapter and can't find one anywhere
_________________________
dsiple
|
Top
|
|
|
|
|
#6563 - 06/16/09 03:54 PM
Re: Mini DVD to standard size DVD adapter
|
Desperado
Registered: 04/19/05
Posts: 361
Loc: Plano, TX
|
Does your camera not have USB or Firewire ports? Either of those will get your video to any Mac.
_________________________
--Greg
|
Top
|
|
|
|
|
#6564 - 06/16/09 06:01 PM
Re: Mini DVD to standard size DVD adapter
|
Deputy Gunslinger
Registered: 06/14/09
Posts: 7
Loc: LA
|
My Panasonic camera's USB port only accesses the still photos stored on a picture card. There's no firewire port. The video data is only recorded to mini discs which cannot be put into a vertical slot drive. Panasonic made this camcorder for ten minutes, then realized all the mistakes they'd made, and quickly dumped it for a hard disc drive. No wonder it was so cheap - they were dumping them.
_________________________
dsiple
|
Top
|
|
|
|
|
#6565 - 06/16/09 07:05 PM
Re: Mini DVD to standard size DVD adapter
|
Desperado
Registered: 03/21/01
Posts: 14054
Loc: Memphis, TN USA
|
Have you asked Apple about it? If you have an Apple store in your area, they might be able to help. You could also get an external DVD drive that uses a standard tray. You might also try this link , but I don't know for sure if/how it will work with your Mac.
|
Top
|
|
|
|
|
#6566 - 06/16/09 07:17 PM
Re: Mini DVD to standard size DVD adapter
|
Deputy Gunslinger
Registered: 06/14/09
Posts: 7
Loc: LA
|
Apple actually submitted a patent application for an adapter ring, but apparently never made one. The Memorex item is exactly what I'm looking for but they quit making them in 2002, as did Philips and Sony but I've been unable to find one.
_________________________
dsiple
|
Top
|
|
|
|
|
|
0 registered (),
272
Guests and
2
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
8,717 Registered Members
88 Forums
11,331 Topics
98,709 Posts
Most users ever online: 1,572 @ 12/03/24 09:58 AM
|
|
|
|