Outlaw Audio home shop products hideout news support about
Page 1 of 2 1 2 >
Topic Options
#48060 - 07/06/03 04:22 PM 950's LCD, Matrix display fading..
2ntense Offline
Deputy Gunslinger

Registered: 01/21/03
Posts: 6
Loc: Toledo, OH
Not the tv, but the actual unit itself. The outer edges of the display on the 950 are almost unreadable and just slightly brighter as you look to the middle of the display. It is BAD and has nothing to do with my system settings. Anyone have this happen to them? I'm calling Outlaw tomorrow. Hopefully its covered.

Top
#48061 - 07/08/03 11:44 PM Re: 950's LCD, Matrix display fading..
LuckMan212 Offline
Deputy Gunslinger

Registered: 05/28/03
Posts: 8
Loc: New York, NY, United States
I don't have that problem (yet) but I have noticed that when set to 50% brightness via the menus, the VFD has a VERY noticable 60hz flicker that is somewhat unbearable to look at.

I have several other VFDs including a BG Micro and a Matrix Orbital that I have hooked up to the computer and these are both software dimmable as well and do not exhibit this behavior.

Unfortunately at the full brightness the 950 really stands out when the room lighting is completely dark. Oh well. A small price to pay, you could always buy a filter and stick it on the front of the display.

Top
#48062 - 07/10/03 02:09 AM Re: 950's LCD, Matrix display fading..
Kevin C Brown Offline
Desperado

Registered: 12/11/01
Posts: 1054
Loc: Santa Clara, CA
Any suggestions for where to get a filter like that? Photo shop or something? Also a solution for when the 950 resets the display brightness when powered off.

[This message has been edited by Kevin C Brown (edited July 10, 2003).]
_________________________
If it's not worth waiting until the last minute to do, then it's not worth doing.

KevinVision 7.1 ... New and Improved !!


Top
#48063 - 07/15/03 04:01 PM Re: 950's LCD, Matrix display fading..
2ntense Offline
Deputy Gunslinger

Registered: 01/21/03
Posts: 6
Loc: Toledo, OH
The display is totally out now and does not work. The 950 itself still does though. I talked to tech support and Outlaw is sending me another 950. Great people and service over at Outlaw.

Top
#48064 - 07/15/03 09:52 PM Re: 950's LCD, Matrix display fading..
aej09 Offline
Gunslinger

Registered: 06/12/03
Posts: 51
Loc: Madison, WI, US
How long did it take to go completely out? Mine has been having the same problem for a few days now. I just emailed them today.

Top
#48065 - 07/17/03 10:44 AM Re: 950's LCD, Matrix display fading..
2ntense Offline
Deputy Gunslinger

Registered: 01/21/03
Posts: 6
Loc: Toledo, OH
From the time I noticed it fading to the time it went completely out was 3 days.

Top
#48066 - 07/29/03 12:23 AM Re: 950's LCD, Matrix display fading..
aej09 Offline
Gunslinger

Registered: 06/12/03
Posts: 51
Loc: Madison, WI, US
Well mine never went completely out but they did send me a new one (real damn quick) after the reset procedure didn't work.

Top
#48067 - 07/29/03 12:29 PM Re: 950's LCD, Matrix display fading..
2ntense Offline
Deputy Gunslinger

Registered: 01/21/03
Posts: 6
Loc: Toledo, OH
Quote:
Originally posted by aej09:
Well mine never went completely out but they did send me a new one (real damn quick) after the reset procedure didn't work.


I also have my new one now. We would never get that kind of service in a retail chain.

Later

Top
#48068 - 11/15/03 09:30 PM Re: 950's LCD, Matrix display fading..
LuckMan212 Offline
Deputy Gunslinger

Registered: 05/28/03
Posts: 8
Loc: New York, NY, United States
Sorry I didn't post this sooner, but to the folks looking to purchase a filter to reduce the harshness of the 950's VFD display, you might try this URL:

http://www.matrixorbital.com/pages/accessories.asp

Also, to everyone else, is the 50% brightness flicker problem something unique to my 950 or do they all do that? My unit is circa Feb 2003: it's a "blue-dot" model that I upgraded with the new Cirrus chip to fix the DTS LFE problem.

Should I be worried/concerned about the flickering display? I would really like to keep the display dimmed, but I don't simply because of the flicker issue.

Comments appreciated!

Top
#48069 - 11/24/03 07:11 PM Re: 950's LCD, Matrix display fading..
LuckMan212 Offline
Deputy Gunslinger

Registered: 05/28/03
Posts: 8
Loc: New York, NY, United States
nobody? anyone....Bueller?

Top
Page 1 of 2 1 2 >

Who's Online
0 registered (), 117 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Hedoboy, naowro, BeBop, workarounder, robpar
8705 Registered Users
Top Posters (30 Days)
patm1198 1
Helson 1
Forum Stats
8,705 Registered Members
88 Forums
11,326 Topics
98,691 Posts

Most users ever online: 476 @ 12/28/22 08:54 PM