Outlaw Audio home shop products hideout news support about
Page 1 of 2 1 2 >
Topic Options
#46917 - 06/09/03 12:21 PM Sherbourn PT-7000 & 7/2100 Review
0u812 Offline
Deputy Gunslinger

Registered: 06/09/03
Posts: 5
As you know the Sherbourn and Outlaw processors are virtually identical. Audioholics has just posted an interesting review of the Sherbourn PT-7000 & 7/2100 combo.


http://www.audioholics.com/productreviews/avhardware/SherbournPT700072100.html

Top
#46918 - 06/09/03 11:49 PM Re: Sherbourn PT-7000 & 7/2100 Review
Kevin C Brown Offline
Desperado

Registered: 12/11/01
Posts: 1054
Loc: Santa Clara, CA
Interesting, he also notes the 180 deg phase shift that *some* of us have spotted between the analog and digital crossovers.

But ...

Quote:
What I found was the [digital] subwoofer crossover setting was dependent on the front main channels setting regardless if the front main channels were set to large or small. As a result, I found that if I had the rears and/or center set to say 160Hz, while the front mains were set to 60Hz, a gap of 100Hz of bass was prominent between the rear/center channels and the subwoofer. Thus the 100Hz gap of bass was not reproduced by any channel.


This surprises me in that I specifically asked about this, maybe 3 to 4 months ago here in this forum, and Scott said that each set of speakers was high and low passed with the specific freq setting for that set of speakers. (No global low pass to the sub.)

The only thing I can say in Outlaw's defense, if that is correct, is that I have tried to measure freq response using the sweeps on Avia as well, and it's a lost cause. This is a much better way:

http://www.etfacoustic.com/

In general, it's easy to see he did a more thorough review than most HT mags, and in spite of the issues he found, he still liked it a lot.


[This message has been edited by Kevin C Brown (edited June 09, 2003).]
_________________________
If it's not worth waiting until the last minute to do, then it's not worth doing.

KevinVision 7.1 ... New and Improved !!


Top
#46919 - 06/10/03 01:49 PM Re: Sherbourn PT-7000 & 7/2100 Review
0u812 Offline
Deputy Gunslinger

Registered: 06/09/03
Posts: 5
Kevin;

Lets think about this for the moment;
If Mains set to small fc = 40Hz
Center set to small, fc = 80Hz
Rears set to small, fc =160Hz

The subwoofer has to receive one of the three fc's above. Theoretically, it should receive the highest fc to eliminate any bass gaps between the speakers.

I really don't think multiple crossover settings for each speaker is a good idea and I agree with the review in doing so, try to keep them within 20Hz of each other, if not all set equal.

Top
#46920 - 06/11/03 12:26 AM Re: Sherbourn PT-7000 & 7/2100 Review
Kevin C Brown Offline
Desperado

Registered: 12/11/01
Posts: 1054
Loc: Santa Clara, CA
I definately do not agree.

With your example, the *correct* way to do it is this (keeping the slopes in mind):

Mains set to small, fc = 40Hz: main info above 40 Hz goes to the mains. Main's info below 40 Hz goes to the sub.

Center set to small, fc = 80Hz: center info above 80 Hz goes to the center channel. Center info below 80 Hz goes to the sub.

Rears set to small, fc =160Hz: rear info above 160 Hz goes to the rears. Rear info below 160 Hz goes to the sub.

That is the way it should be done, and that is the way the Sony TA-E9000ES did it, and that is the way that we were told the 950 did it. (Lexicons also do it correctly, but a little differently, especially with the newer MC-8 and MC-12.) But based on that dude's review, the 950 would send all main, center and rear info below 40 Hz (the main xover) to the sub. Hence, leaving gaps for the center and rears.

No reason why multiple (individual) low passes cannot be applied to each *signal* before they are combined with the LFE and sent to the sub.

[This message has been edited by Kevin C Brown (edited June 11, 2003).]
_________________________
If it's not worth waiting until the last minute to do, then it's not worth doing.

KevinVision 7.1 ... New and Improved !!


Top
#46921 - 06/11/03 11:51 AM Re: Sherbourn PT-7000 & 7/2100 Review
73Bruin Offline
Desperado

Registered: 01/01/03
Posts: 506
Loc: Torrance, CA USA
Kevin: I agree with your description of the desirable way for the LFE crossovers to work. However, I am unsure if you are stating that the 950 does or doesn't work this way.
_________________________
Living Room 24x18 open 1/2 flight up to a raised dining room/hall 24x12
Outlaw 976 pre-pro running 5.1 system
Outlaw 750 for Artison Masterpiece LCR and 2 NHT SuperZeros rears
Velodyne Servo FX-1200
LG OLED65C8PUA via HDMI2 to/from 976 HDMI ARC
Roku Ultra
Samsung BD-D5500 BluRay
Amazon FireStick 4K to 976 Aux HDMI input for Amazon Music Ultra

Top
#46922 - 06/11/03 08:19 PM Re: Sherbourn PT-7000 & 7/2100 Review
Kevin C Brown Offline
Desperado

Registered: 12/11/01
Posts: 1054
Loc: Santa Clara, CA
That's how I thought the 950 worked based on a question that Scott answered once. (When I get some free time, I'll try to find the exact thread.)

But based on the review, the author is saying that the low pass freq for the mains is the low pass freq that is also applied to the center and surrounds/rears for the info that is sent to the sub.
_________________________
If it's not worth waiting until the last minute to do, then it's not worth doing.

KevinVision 7.1 ... New and Improved !!


Top
#46923 - 06/12/03 01:41 AM Re: Sherbourn PT-7000 & 7/2100 Review
Will Offline
Desperado

Registered: 05/28/02
Posts: 605
Loc: LA's The Place
The early reviews said the Outlaw Model 950 will be the first surround sound product to feature Cirrus Logic's "triple Crossover" circuit. By now, do we know whether many products in aiddtion to Outlaw and their clones, use Cirrus's triple crossover circuit?

Thanks!

Top
#46924 - 06/12/03 07:40 PM Re: Sherbourn PT-7000 & 7/2100 Review
0u812 Offline
Deputy Gunslinger

Registered: 06/09/03
Posts: 5
Kevin;


From what you are saying, you imply the sub will then be crossed over at 160Hz which is exactly opposite of what Audioholics.com has reported. I know a friend who has the Sony processor that you mention and if memory serves it correctly sets the sub crossover to the highest setting that you choose for your speakers. The Outlaw/Sherbourn, seems fixed on whatever the mains are set to, according to the review at Audioholics.com.

Top
#46925 - 06/13/03 12:44 AM Re: Sherbourn PT-7000 & 7/2100 Review
Kevin C Brown Offline
Desperado

Registered: 12/11/01
Posts: 1054
Loc: Santa Clara, CA
Quote:

From what you are saying, you imply the sub will then be crossed over at 160Hz which is exactly opposite of what Audioholics.com has reported.


No, that is not what I said. This is what I said:

Quote:
But based on that dude's review, the 950 would send all main, center and rear info below 40 Hz (the main xover) to the sub.


I don't think you are understanding what I wrote. The way that it is supposed to work, is that each channel is low passed at a different freq, *then* each of those "parts" is added to the LFE signal and sent to the sub. Each of the high passed part of each signal is sent to the respective channel.

You understand that a crossover is two parts, right? A high passed filter and a low pass filter? All of the info above the high pass freq for that channel is sent to that channel's main speaker (left front, center, whatever). All of the info below the low pass freq for that channel is sent to the sub, added to the dedicated LFE channel. The high pass and low pass freqs are typically the same. But in the 950's case, according to the review, they aren't, leaving gaps in the response.

Let's try again for the rears:

Quote:
Rears set to small, fc =160Hz: rear info above 160 Hz goes to the rears. Rear info below 160 Hz goes to the sub.


This is how it's supposed to work. The problem is that according to the review, the rears are actually low passed at 40 Hz to the sub, but high passed at 160 Hz to the surrounds & rears. So because the high pass is 160 & the low pass is 40, from 40 to 160 Hz is missing.

Make sense?

BTW, the Sony's individual crossovers work correctly. But it can be confusing, because in addition to the crossover for each "set" of speakers, the TA-E9000ES also has a *separate* crossover (low pass) setting specifically for the LFE signal, apart from the info crossed over (low passed) from the main channels.


[This message has been edited by Kevin C Brown (edited June 13, 2003).]
_________________________
If it's not worth waiting until the last minute to do, then it's not worth doing.

KevinVision 7.1 ... New and Improved !!


Top
#46926 - 06/13/03 09:16 AM Re: Sherbourn PT-7000 & 7/2100 Review
Alejate Offline
Gunslinger

Registered: 05/10/03
Posts: 181
Loc: Albany, NY
Okay, so where is Scott to help sort this out? A lot of questions could be stopped if Outlaw addressed this. Yes I know that in another thread this was discussed a while back but did Outlaw actually test there triple crossovers? This is like the e-prom issue all over again, deficiencies in the design are being discovered by users and testers. I am glad I spent $899 for the Outlaw vs their clones, and that Outlaw's customer support is first rate. Still, I would like to know how to actually set my crossovers. If we really are missing certain frequencies because our mains are set lower than our surrounds then this defeats one of the main reasons I selected the 950 in the first place.

Top
Page 1 of 2 1 2 >

Who's Online
0 registered (), 106 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
Hedoboy, naowro, BeBop, workarounder, robpar
8705 Registered Users
Top Posters (30 Days)
Helson 1
patm1198 1
Forum Stats
8,705 Registered Members
88 Forums
11,326 Topics
98,691 Posts

Most users ever online: 476 @ 12/28/22 08:54 PM