Outlaw Audio home shop products hideout news support about
Page 3 of 4 < 1 2 3 4 >
Topic Options
#35618 - 04/10/06 10:40 AM Re: AV/Rack ??
nfaguys Offline
Desperado

Registered: 04/09/05
Posts: 500
Loc: Maine
If you want a real 19 inch relay rack (basically they're kinda ugly for living room) and you want to support your heavy amp, but not on the bottom, MIDDLE ATLANTIC and others have shelves which will hold over 100 pounds. I didn't want glass shelves for my "stuff" so in one installation at home I took a surplus 19" relay rack from a TV station ($35) and put "firring strips" on it and to those nailed with brads pannelling, available at any hdwe store. The outside corner trim. Varnished the raw trim. Total cost for the 74 inch steel rack which will hold hundreds of pounds [and, to which the wife doesn;t object] around $80...and it's all vertical so the footprint isn't wide.
smile and wife happy laugh
_________________________
Living Room:
5.1 Surround and 4channel inline room
990/7700/6-KEF-107s/LFM1 x 2/ SMS Awaiting Trinnov
Millenium dts decoder;Digital Director
Players: Tascam CD01U/SonyCX455 x 3/DV955/BDP83
Old Sony 60" SXRD TV
Zone 2 (also liv-Room: listening to music while Mrs watches TV): Crown SL2 preamp/D40 Amp/Stax Headphones



My "Man-cave":
4 channel-only inline room. No TV (thank heaven)!!!
990/755/4-KEF 107s
Tascam CD01U/dts decoder/digital director
Alesis 16x4x2 mixer
Recorders Alesis HD24/ML9600/Crown CX844s/SonyDAT/Tascam DA38
Ham Radio Shack (KB1STH) ICOM/Yaesu/Drakes x 3

Top
#35619 - 04/10/06 02:56 PM Re: AV/Rack ??
sluggo Offline
Desperado

Registered: 04/19/05
Posts: 361
Loc: Plano, TX
nfaguys - how'd you come across a surplus relay rack from a TV station? Any advice for those of us looking for one?
_________________________
--Greg

Top
#35620 - 05/05/06 01:58 AM Re: AV/Rack ??
Holydoc Offline
Gunslinger

Registered: 10/02/05
Posts: 20
Thought I would follow up on my furniture post now that I finally got it in.

Finally got my furniture in from Diamondcase. It is designed to hold just about any amount of weight, has casters, and I had exhaust fans installed in each cabinet. Now if I just could get that 50" 600U to replace my current TV.

Front View Closed



Front View Open:



Side View:

_________________________
Holydoc
_ _ _________________ _ _
Onkyo -TX-NR901 Receiver
PolkAudio - RTi12 (Left and Right)
PolkAudio - CSi5 (Center)
PolkAudio - FXi3 (Back and Surround)
SVS - PB-12/Plus (Subwoofer)
Bluejean - Speaker Cables
Outlaw 770 Amp

Top
#35621 - 05/07/06 05:24 PM Re: AV/Rack ??
nfaguys Offline
Desperado

Registered: 04/09/05
Posts: 500
Loc: Maine
about a month ago Sluggo wrote:

nfaguys - how'd you come across a surplus relay rack from a TV station? Any advice for those of us looking for one?

My appologies, Greg, I haven't looked at this thread since you wrote. To answer the question: I called the station and asked to talk to one of the tech guys and simply asked whether they had any used or surplus 19 inch racks they wanted to get rid of. He said that they were going to do so and had some in the garage. I made an appointment and went with pickup truck. $35 and it had two pullout trays, like writing desks or something.

Cleaned it, put on "firring strips" to which I attached panel from hdwe store and outside trim. Was ugly before. Looks ok now.

I sure would have liked the outlaws to have provided 19" mounting option. Still, extremely pleased with their eqpt. And if I needed to I could get a 19" heavy duty shelf. They're not that expensive.

Good luck and let us know what you do.
_________________________
Living Room:
5.1 Surround and 4channel inline room
990/7700/6-KEF-107s/LFM1 x 2/ SMS Awaiting Trinnov
Millenium dts decoder;Digital Director
Players: Tascam CD01U/SonyCX455 x 3/DV955/BDP83
Old Sony 60" SXRD TV
Zone 2 (also liv-Room: listening to music while Mrs watches TV): Crown SL2 preamp/D40 Amp/Stax Headphones



My "Man-cave":
4 channel-only inline room. No TV (thank heaven)!!!
990/755/4-KEF 107s
Tascam CD01U/dts decoder/digital director
Alesis 16x4x2 mixer
Recorders Alesis HD24/ML9600/Crown CX844s/SonyDAT/Tascam DA38
Ham Radio Shack (KB1STH) ICOM/Yaesu/Drakes x 3

Top
#35622 - 05/08/06 12:44 PM Re: AV/Rack ??
Bugbitten Offline
Gunslinger

Registered: 05/29/05
Posts: 169
Loc: Western KY
I was thinking about mounting a four shelf stand on this dolly .

The stand is $150 at BB and the dolly $25 at Lowe's.

The bottom shelf would sit on the dolly with the amp on that shelf. Power center above that. Denon next. DVD player on top.
_________________________
Outlaw M200 x4 / Monster 3250
Harmony 1100
Sony 55HX800
x-Statiks, x-voce, x-omni

Top
#35623 - 02/05/07 12:49 AM Re: AV/Rack ??
nomoneybutgoodsound Offline
Gunslinger

Registered: 07/21/06
Posts: 164
Loc: Mission,BC
I had some difficulty finding a rack that suited my needs. I did the web search and actually went into some stores, but could not find anything that I liked. So I built my own. I like the use of steel and aluminum. The steel you can paint any color and aluminum checker plate looks cool. So here is what I did. I used 1 1/2 angle for the base, I had to be able to mount wheels on to it. I made an identical base for the top except mounted it upside down. From there I used 1 x 1 square tubing braced with a light gauge angle (for shelves). This was sprayed a flat black. The shelves were all aluminum checker plate 1/4 ". To mount the shelves and prevent any vibration, they were "glued" using polyurethane. The sides were covered with aluminum checker plate. To prevent any vibrations, some small fabric furniture feet were used to isolate the sides. It looks very cool and many people actually thought I bought it from somewhere. Yes it took a little time (6 hours plus paint drying time), but I made it the way I wanted not someone elses concept. Additionally it will hold ANY amp I put on it. ( It was built with the possibility of buying a larger (deeper) amp. If anyone has some problems with finding the right furniture have it made for them. Total cost for me was less than $200.00 but I can weld. The steel was cut for me (better to use thier bandsaw than mine). In this day and age, having custom built racks or tables or speaker stands is actually very inexpensive and you get want you want not someone elses idea. (speaker stands are so easy to make or have made. A lot of my friends have speaker stands made by me). You just have to convince your wife that it will look alright! I am pretty lucky, my wife does not really care what I do in the basement, but can still pass a sincere complement.

Top
#35624 - 02/05/07 01:49 PM Re: AV/Rack ??
Bill O Offline
Gunslinger

Registered: 08/14/06
Posts: 164
Loc: Missouri
Could you post a picture.I envy you, as I am a novice welder, with all the equipment to do so, my weilding sucks.

Top
#35625 - 02/05/07 07:26 PM Re: AV/Rack ??
nomoneybutgoodsound Offline
Gunslinger

Registered: 07/21/06
Posts: 164
Loc: Mission,BC
Still learning about digital cameras. So I will see what I can do. There is only one thing that makes a good welder - practice! There were lots of projects that I had to throw out or sell cheap. But the more practice you get, the more creative as well. My racks for DVD's and CD's are also homemade. Very sturdy. I do have to think about a better colour scheme. Everything is black.

Top
#35626 - 02/09/07 02:39 PM Re: AV/Rack ??
RedSIinPA Offline
Gunslinger

Registered: 12/28/06
Posts: 278
Loc: Outside Phila.
wow, NMBGS, can you make me some small ramp like structures that will help me invert my front wall-mounted speakers inward towards the listener? They're too far apart. Moving them in isn't an option due to windows. buying towers isn't an option because I have perfectly good speakers...lol smile

seriously though...little ramp-like things that could hang on the wall. same size as my speakers. and then hang the speakers on them. I've envisioned this easily enough. But I have neither the tools (i.e. a lathe) or the skills for that matter to do this. simple enough project though.

[/end_hijack] sorry.
_________________________
Model 1070
Toshiba HD-A35 & Pioneer BDP-51
Tivo Series 3
Elite 50" / Aquos 32"
Squeezebox Radio

Stereo Setup:
NAD C326BEE (50Wx2)
Elite DV-47Ai Universal SACD/DVD-A
Citypulse DA7.2x II + TXCO DAC
B&W 685s
JL Fathom F112
Denon AH-D2000 Headphones


Top
#35627 - 02/22/07 08:15 AM Re: AV/Rack ??
BobZoom Offline
Gunslinger

Registered: 01/29/07
Posts: 56
Loc: near Chicago
RedSIinPA,

What you want can probably be fabricated from wood easily enough. If the speakers have a wood grain finish the 'ramp' could be stained and finished to match.

The 'ramps' could be attached to the wall and your hanging brackets for the speakers attached to the ramps.

There are a lot of variables. The ramps could even be made somewhat adjustable to give you flexibility in the aiming pattern. A picture or two would be a help if you're interested in farming out such a project. Of course a lot depends on what you're willing to spend. But isn't great sound priceless?
cool
_________________________
Outlaw 990; Carver TFM45 (mains); Carver TFM35 (surrounds); Carver TFM24 (bridged for center); Carver TFM15CB (rears); Acoustic Research AR9 mains; Polk CS400I center; Polk FX500I surrounds; Polk FX300I rears; Sony KDS-60A2000; Oppo DV-981HD; MX-850

Top
Page 3 of 4 < 1 2 3 4 >

Who's Online
0 registered (), 93 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
audio123, Dustin _69c10, Dain, REP, caffeinated
8717 Registered Users
Top Posters (30 Days)
The Wyrm 3
kiwiaudio 1
butchgo 1
Forum Stats
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts

Most users ever online: 1,171 @ 11/22/24 03:40 AM