Posted by: rmilewsk
depth of 7700 - 03/22/06 11:48 PM
Can anyone measure the depth of the 7700 for me? The web site says 18 inches. Does that include all of the connectors on the back?
Posted by: Ritz
Re: depth of 7700 - 03/23/06 08:37 AM
I'd leave yourself an extra 2-3 inches for protruding cables.
Cheers,
Posted by: rmilewsk
Re: depth of 7700 - 03/24/06 02:24 AM
Thanks. So what's the total depth?
Posted by: Ritz
Re: depth of 7700 - 03/24/06 09:00 AM
Well, if the web site says 18" for the device + 2-3 inches for cables in the back...you should budget about 21" of space for the device. If you don't mind it protruding a bit in front (the feet aren't flush with the front of the amp), you can possibly get away with less.
I don't like "extreme" bends in my cabling so I always try to leave extra room in the back.
Cheers,
Posted by: Wharf Rat
Re: depth of 7700 - 03/24/06 07:43 PM
The case itself is 16.5" deep.
Posted by: rmilewsk
Re: depth of 7700 - 03/25/06 12:06 AM
16.5 inches deep!?!? The web site says 18 inches. What happened to the other inch and a half. That's a lot to lose!
Posted by: Wharf Rat
Re: depth of 7700 - 03/25/06 12:39 PM
-
The specs must take into account the binding posts which protrude from the rear face.
-