#97896 - 03/10/18 09:00 PM
976 trigger output voltage is 5V instead of 12V
|
Gunslinger
Registered: 11/30/05
Posts: 28
Loc: Austin TX
|
I discovered that the trigger output voltage of my 976 is 5V (as measured with a meter) instead of the expected 12V. I just noticed the 976 web page says the trigger is 5V, but the manual says it is 12V in two places. I don't think this is going to be a huge deal since for my application, I can just swap out the 12V relay with one that has a 5V coil.
I've emailed support about this and I'm waiting to hear back.
Edited by BryanH (03/11/18 01:21 PM)
|
Top
|
|
|
|
|
#97897 - 03/10/18 10:28 PM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: BryanH]
|
Gunslinger
Registered: 11/23/17
Posts: 19
|
That is a good catch. I would be highly surprised if it was 5V (especially since their own amps use a 12V trigger). In addition, if you look at the list of specifications on the 976 webpage (on the right) it says 12V. It appears to only say 5V in the "Among the Model 976's many features are:" section.
But certainly would like to hear their response.
|
Top
|
|
|
|
|
#97898 - 03/10/18 11:14 PM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: BryanH]
|
Desperado
Registered: 04/08/08
Posts: 2676
Loc: Columbus,North Carolina
|
Check the voltage with a meter and let us know.
_________________________
Music system Model 990/7500/Magnepan 1.6 QRs/Technics SL1200 MK2/Aperion S-12 Subwoofer/OWA3/Sony NS75H DVD APC H15 Power Conditioner
TV System Large Advent Loudspeakers/ Polk center/Monoprice surrounds/Panasonic Viera 42 inch/Onkyo HT-RC260/Sony BDP S590/Directv
Home Theater System Onkyo PR-SC886/Outlaw 7125 Klipsch RF-82 L/R,RC-62 center, RB-35 SR/SL, BENQ HT1075, Outlaw LFM1-EX/OPPO BDP-83/Directv Harmony ONE Blue Jeans and Monoprice interconnects APC H15 Power Conditioner
|
Top
|
|
|
|
|
#97900 - 03/11/18 01:26 PM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: BryanH]
|
Desperado
Registered: 06/29/01
Posts: 894
Loc: Grants Pass, OR
|
He did! Says so right up there in the first sentence of the OP. I'm curious about this, too. If I ever migrate to the 976, I'd like to know the trigger will work with my 7125.
|
Top
|
|
|
|
|
#97901 - 03/11/18 03:32 PM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: BryanH]
|
Gunslinger
Registered: 10/28/08
Posts: 25
Loc: Upstate New York
|
Works fine with my 976 purchased in January.
_________________________
976/7125/OPPO BDP-83 NHT 2.5i's main, NHT Superones Side/Rear, Mirage OMNI CC center 2 M8 subs, Harmony 650, OAW3 Samsung 60" 4k Outlaw 970 still works great(just decided to finally upgrade)
|
Top
|
|
|
|
|
#97902 - 03/11/18 07:55 PM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: Owl's_Warder]
|
Gunslinger
Registered: 11/23/17
Posts: 19
|
He did! Says so right up there in the first sentence of the OP. I'm curious about this, too. If I ever migrate to the 976, I'd like to know the trigger will work with my 7125. Ahh, but that info was added today, after the other posts. Original post did not mention using a meter. With that said, it is curious why they would use a 5 Volt trigger but their amps say a 12V.
|
Top
|
|
|
|
|
#97903 - 03/12/18 12:29 AM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: BryanH]
|
Deputy Gunslinger
Registered: 12/08/17
Posts: 1
|
My 7125 triggers "ON" just fine with the 976...
|
Top
|
|
|
|
|
#97904 - 03/12/18 09:22 AM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: BryanH]
|
Desperado
Registered: 04/08/08
Posts: 2676
Loc: Columbus,North Carolina
|
They didn't use a 5v trigger. OP needs to call Outlaw and get a repair. The 5v accessory power ports on the 976 are right next to the trigger outlets. Maybe someone at the factory got confused.
_________________________
Music system Model 990/7500/Magnepan 1.6 QRs/Technics SL1200 MK2/Aperion S-12 Subwoofer/OWA3/Sony NS75H DVD APC H15 Power Conditioner
TV System Large Advent Loudspeakers/ Polk center/Monoprice surrounds/Panasonic Viera 42 inch/Onkyo HT-RC260/Sony BDP S590/Directv
Home Theater System Onkyo PR-SC886/Outlaw 7125 Klipsch RF-82 L/R,RC-62 center, RB-35 SR/SL, BENQ HT1075, Outlaw LFM1-EX/OPPO BDP-83/Directv Harmony ONE Blue Jeans and Monoprice interconnects APC H15 Power Conditioner
|
Top
|
|
|
|
|
#97905 - 03/12/18 10:21 AM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: BryanH]
|
Desperado
Registered: 11/11/09
Posts: 514
Loc: Canton, MI
|
Some of the Outlaw amps (e.g. 7125) indicate that they trigger at 3-32 volts which would work with a 5-volt trigger output so that doesn't necessarily mean the 976 is outputting 12 volts.
Has anyone else measured the 976 trigger output with a meter to confirm the voltage output?
_________________________
975/7075/SMS-1 Aperion Verus Grand Towers & Bookshelves, Verus Forte Center, Infinity Surrounds, Ultra-X12 Oppo BDP-203, XBOX360, Xbox One LG 65" OLED RR2150 w/Klipsch SCR-2
|
Top
|
|
|
|
|
#97906 - 03/12/18 10:41 AM
Re: 976 trigger output voltage is 5V instead of 12V
[Re: BryanH]
|
Gunslinger
Registered: 11/30/05
Posts: 28
Loc: Austin TX
|
Got an email from support. Hello Bryan,
That is correct; the trigger output on the Model 976 is 5V. There is not an adjustment for this.
Best Regards,
Ben Brewer Outlaw Audio
|
Top
|
|
|
|
|
|
0 registered (),
117
Guests and
3
Spiders online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
8,705 Registered Members
88 Forums
11,326 Topics
98,691 Posts
Most users ever online: 476 @ 12/28/22 08:54 PM
|
|
|
|