I also posted this in the M-200 forum but it isn't checked as frequently...

Question to those who have a 200...
I've read about the heat issue and how there seems to be none whatsoever. Could I stack my Panamax 4300 conditioner on top of 2 of the 200's? Am I looking for trouble or would it be no big deal.

Maybe I'm better off in relocating the panamax, which could be a pain in the ass.

Thanks in advance.



------------------
Play it LoUd!!

Outlaw has said that you can stack as many as 3 Model 200's on top of each other. The Panamax should weigh less than a 200, so from the weight standpoint there isn't a problem. The only thing I can think of is that you may want to look at the height of the gap between the top 200 and the Panamax -- the Panamax will probably have shorter feet than a 200, so the top 200 will have a little less ventilation on top. A little discrete "jacking up" of the Panamax wouldn't hurt if the gap is significantly smaller.

------------------
gonk -- Saloon Links | Pre/Pro Comparison Chart | 950 Review

Thanks Gonk. I was thinking along the same lines, with the jacking up of the panamax. Its feet are definitely smaller so I think Ill try to put a little something under each foot of the panamax. Thanks again


------------------
Play it LoUd!!