Outlaw Audio home shop products hideout news support about
Topic Options
#46393 - 04/26/03 07:18 PM No Audio after set up.
Mikehdtv Offline
Gunslinger

Registered: 04/20/03
Posts: 28
Loc: Atlanta, GA
Hi, finally hooked up my 950...all seemed fine, set to an FM station to be sure I had an audio signal, everything was fine. Went into speaker config and set all at large and set crossover at 80 hz. When I exited I no longer had any audio. I also have no audio from any components now. I reset the system and still nothing. Any suggestions?

Mike

Top
#46394 - 04/26/03 09:17 PM Re: No Audio after set up.
Smart Little Lena Offline
Desperado

Registered: 01/09/02
Posts: 1019
Loc: Dallas
Hi, Check your trigger cable on the back of the Outlaw if in use. If this has pulled loose while moving your system back in place you will loose all audio.

Hope thats the cuplprit! Simple, happened to me, ...sigh (love the quick fixes) back in business.

[This message has been edited by Smart Little Lena (edited April 26, 2003).]

Top
#46395 - 04/27/03 04:35 PM Re: No Audio after set up.
Mikehdtv Offline
Gunslinger

Registered: 04/20/03
Posts: 28
Loc: Atlanta, GA
Lena, thanks for the reply but that's not it. The audio went out in the middle of speaker configuration and never came back. I hooked up a Marantz mono block to the center channel and still don't hear a peep.
Any other suggestions?
Mike

Top
#46396 - 04/27/03 04:55 PM Re: No Audio after set up.
Mikehdtv Offline
Gunslinger

Registered: 04/20/03
Posts: 28
Loc: Atlanta, GA
I just hooked up another preamp to my 7100 and got audio, so it's not the amp, the problem is the pre amp. Has anyone encoutntered something like this or did I just get a lemon?

Mike

Top
#46397 - 04/28/03 09:57 AM Re: No Audio after set up.
TANGO Offline
Gunslinger

Registered: 03/10/03
Posts: 35
Loc: Jenison, MI, United States
Hi mikehdtv.

Sorry to hear about your problem- had this happen to me but thankfully it was the same thing that SLL had- the "loose trigger" syndrome.

Since you just installed your 950, I assume you just got it? If so, ggod news-- its under warranty, so bad news(because it means you can't use it now) send it back. Outlaw WILL take care of you.

Just wondering-- could a short somewhere have blown the 950's fuse??

------------------

Top
#46398 - 04/28/03 12:21 PM Re: No Audio after set up.
Scott Offline
Desperado

Registered: 01/07/10
Posts: 673
Hello Mike,

Just to eliminate a potential "trigger" problem, please disconnect the trigger connection from both the pre-amp and the amplifier.

Thanks,

Scott

Top
#46399 - 04/28/03 06:12 PM Re: No Audio after set up.
Mikehdtv Offline
Gunslinger

Registered: 04/20/03
Posts: 28
Loc: Atlanta, GA
Thanks everyone for your replies. I contacted Mike at customer service and we went through every possible problem, reset, and configuration. No luck. He thinks the processing chip is locked up.

Now for the good news. In all my years of dealing with customer service of all types I must say Outlaw ranks among the best! Mike walked me through the process of checking the unit in a clear and direct manner. Once we determined the unit was defective he said he would Ship (via DHL) a new unit! Damn, this guy is an asset to Outlaw! I bought Outlaw based on reviews and their reputation for customer support, and I'm glad I did. Looks like I'm an Outlaw for life!

Outlaw you have my kudos!
Mike

Top
#46400 - 04/28/03 07:14 PM Re: No Audio after set up.
bossobass Offline
Desperado

Registered: 08/19/02
Posts: 430
Loc: charlotte, nc usa
great news, Mike!

let us know how everything works out...and sounds.
_________________________
"Time wounds all heels." John Lennon

Top
#46401 - 04/29/03 06:09 PM Re: No Audio after set up.
Mikehdtv Offline
Gunslinger

Registered: 04/20/03
Posts: 28
Loc: Atlanta, GA
Got my replacement 950 today (24hrs) wow! It's working like a charm! Thanks Outlaw!

Mike

Top
#46402 - 04/30/03 03:53 PM Re: No Audio after set up.
TANGO Offline
Gunslinger

Registered: 03/10/03
Posts: 35
Loc: Jenison, MI, United States
Welcome to Outlaw, Mike!! And aren't you GLAD you did.

Read this and weep, Outlaw nay-sayers

Top

Who's Online
0 registered (), 91 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
jamescuz, Zilla8d3, waferman, picnicjc, Hedoboy
8709 Registered Users
Top Posters (30 Days)
butchgo 1
zuter 1
Forum Stats
8,709 Registered Members
88 Forums
11,327 Topics
98,693 Posts

Most users ever online: 476 @ 12/28/22 08:54 PM