I've submitted a trouble ticket on this, but thought I would also consult the Hive Mind in the Saloon to see if anyone has a solution.
We had a power failure here over the weekend. My RR2150 (purchased Feb 2016) was powered off and connected to a surge-protected outlet in Standby mode. On Monday I went to turn the unit on via the remote and it would not turn on. Batteries in the remote are good (tested with battery checker: full power). The Standby light on the RR2150 was off. I have tried:
1. flipping the main power switch on the back,
2. checked the outlet (it's good, breaker not tripped, etc.),
3. tried the RR2150 with a different, known-good outlet, turned the unit off (again via the switch on the rear) and
4. disconnected / reconnected the power cord, but no joy.
Nothing else in my home was damaged by the power outage, so there was not "surge" damage. No other electronics connected to the same outlet have any issues.
I'm hoping there's some secret combination of button presses that may "reset" whatever is keeping the system from turning on.
Any advice would be appreciated, though I'm prepared to ship the unit back to Outlaw if need be for repair.
_________________________
Be Seeing You...
;-) G. E. S.