Outlaw Audio home shop products hideout news support about
Page 1 of 3 1 2 3 >
Topic Options
#97537 - 01/09/18 09:39 AM 976 On Screen Display
jmeno Offline
Gunslinger

Registered: 09/03/08
Posts: 32
Loc: Staten Island N.Y.
This is going to be a silly question. I am currently a 990 owner. It's been great over the years but I'd love to get rid of the DVI and all the optical and coaxial cables in my system. I've been waiting to upgrade for a long time and I think I'm probably going to go with the 976. I don't think I would be running extra speakers in my ceiling so 7.1 is good enough for me. My question is regarding the 976 On Screen Display. Does the 976 have an On screen display? One thing that always bothered me about the 990 was that it did not feature an OSD. My gear is at the rear of my room so adjusting the volume requires me to turn around and look at the 990 to see where the volume is at. Adjusting the settings requires me using a 9 inch black and white TV that is attached to the 990. I really hope the 976 has an OSD. I always thought it was crazy that the 990 was such a great piece of audio equipment but I had to use archaic equipment to make adjustments. Thanks in advance for your thoughts.

Top
#97538 - 01/09/18 11:17 AM Re: 976 On Screen Display [Re: jmeno]
mdanderson Offline
Gunslinger

Registered: 04/14/01
Posts: 161
Loc: Garland,Tx. USA
The 976 has an ODD. You can use the HDMI out for this.
_________________________
Paradigm Studio 20v5-fronts
Paradigm Studio CC-490v5-center
Paradigm Studio 10v5- side surrounds,Monitor surround 3v7-bck surr
Oppo UDP-205/LG 65C6
Outlaw 976 prepro/ Emotiva BasX A-700 amp
Power Sound Audio 15S

Top
#97539 - 01/09/18 11:26 AM Re: 976 On Screen Display [Re: mdanderson]
drueb Offline
Gunslinger

Registered: 01/13/16
Posts: 77
Loc: Texas
Originally Posted By mdanderson
The 976 has an ODD. You can use the HDMI out for this.


Pardon my ignorance, what is an "ODD?" Thanks!
_________________________
Outlaw Model 976 AV Surround Processor
Outlaw Model 5000 5 Channel Amplifier
JBL Studio 590 Left and Right
JBL Studio 520C Center
2 JBL Sub 550P
Polk 265RT 3 Way Surrounds (in wall)
Sony Bravia 77" Class - A80CJ Series - 4K UHD OLED TV
Panasonic DP-UB820-K 4K Player
Technics SL 1210 GR (2019)
Ray Samuels F-117 Nighthawk - Phono Preamp
Ortofon Bronze 2M; Ortofon Headshell;Emmeline Nighthawk Phono Pre-Amp by Ray Sammuels
Schitt Loki
Wire World RCA Cables
Drop THX AAA 789 Headphone Amp
Blue Jeans Speaker Cable Belden 10-gauge 5T00UP (Front L&R and Center)
Blue Jeans Interconnects LC-1's



Top
#97541 - 01/09/18 11:55 AM Re: 976 On Screen Display [Re: drueb]
mdanderson Offline
Gunslinger

Registered: 04/14/01
Posts: 161
Loc: Garland,Tx. USA
Originally Posted By drueb
Originally Posted By mdanderson
The 976 has an ODD. You can use the HDMI out for this.


Pardon my ignorance, what is an "ODD?" Thanks!


Sorry that was a Typo. It should have read
OSD for on screen display. I think you are messing with me. You know what I meant.
_________________________
Paradigm Studio 20v5-fronts
Paradigm Studio CC-490v5-center
Paradigm Studio 10v5- side surrounds,Monitor surround 3v7-bck surr
Oppo UDP-205/LG 65C6
Outlaw 976 prepro/ Emotiva BasX A-700 amp
Power Sound Audio 15S

Top
#97542 - 01/09/18 12:04 PM Re: 976 On Screen Display [Re: jmeno]
jmeno Offline
Gunslinger

Registered: 09/03/08
Posts: 32
Loc: Staten Island N.Y.
Great to hear! I assume this is with the volume as well as with setting up the system and assigning the inputs, etc. I would love to see some pics of the 976 OSD.

Top
#97543 - 01/09/18 12:19 PM Re: 976 On Screen Display [Re: jmeno]
kiwiaudio Offline
Gunslinger

Registered: 01/16/11
Posts: 85
Loc: United States
No volume on screen, only shows on the front panel while you make adjustments too.
_________________________
Double drywalled, "Green Glue" treated Theater
GIK acoustic treatment
Epson 8700UB Projecting on a 135" Seymour XD Audio transparent screen
Outlaw 976 Processor
Outlaw 755 amp for Center and all four surrounds
Adcom GFA 555II for Main L & R channels
Behringer EP4000 for two homemade subs
Outlaw Ultra X13 for REAL Sub Bass !
OPPO BDP103, Marantz CD63SE, Denon DP300F
2 Adcom ACE515s for AC current treatment
Newport Theater Director for AC distribution.
Speakers are all built by myself utilizing Dynaudio Drivers
Second room: Yamaha receiver, Musical fidelity X10D tubes, Carver C9 holographic pro.

Top
#97544 - 01/09/18 12:30 PM Re: 976 On Screen Display [Re: jmeno]
arbitrageur Offline
Gunslinger

Registered: 12/16/17
Posts: 58
Loc: Minneapolis, MN
There are screen shots of the OSD in the manual if you want to see examples. It is very utilitarian and geared towards system setup. The OSD does not overlay information on an input, when the OSD is active sound and video are muted.
_________________________
Outlaw Audio Model 976 / 7700 / Ultra-X13
B&W CM9, CM Center, DS3 (side), DM303 (back)
Blue Jeans Cables (XLRs, Canare 4S11 Bi-wire, HDMI)
Tivo Bolt, Xbox Series X, Panasonic ub820, AppleTV 4k, LG C765P
Roon, Allo Digione Signature, Sonore MicroRendu, Uptone Audio LPS-1, Peachtree Audio Nova 150
GIK Acoustics Soffit Bass Traps, 244 Panels, Monster Bass Traps, QRD7 / Polyfusor Diffusers

Top
#97546 - 01/09/18 04:24 PM Re: 976 On Screen Display [Re: mdanderson]
drueb Offline
Gunslinger

Registered: 01/13/16
Posts: 77
Loc: Texas
Originally Posted By mdanderson
Originally Posted By drueb
Originally Posted By mdanderson
The 976 has an ODD. You can use the HDMI out for this.


Pardon my ignorance, what is an "ODD?" Thanks!


Sorry that was a Typo. It should have read
OSD for on screen display. I think you are messing with me. You know what I meant.


Nope, not messing with you...really thought it was a new abbreviation for a function...allowing some type of OSD.



Edited by drueb (01/09/18 04:25 PM)
_________________________
Outlaw Model 976 AV Surround Processor
Outlaw Model 5000 5 Channel Amplifier
JBL Studio 590 Left and Right
JBL Studio 520C Center
2 JBL Sub 550P
Polk 265RT 3 Way Surrounds (in wall)
Sony Bravia 77" Class - A80CJ Series - 4K UHD OLED TV
Panasonic DP-UB820-K 4K Player
Technics SL 1210 GR (2019)
Ray Samuels F-117 Nighthawk - Phono Preamp
Ortofon Bronze 2M; Ortofon Headshell;Emmeline Nighthawk Phono Pre-Amp by Ray Sammuels
Schitt Loki
Wire World RCA Cables
Drop THX AAA 789 Headphone Amp
Blue Jeans Speaker Cable Belden 10-gauge 5T00UP (Front L&R and Center)
Blue Jeans Interconnects LC-1's



Top
#97559 - 01/11/18 09:20 AM Re: 976 On Screen Display [Re: jmeno]
jmeno Offline
Gunslinger

Registered: 09/03/08
Posts: 32
Loc: Staten Island N.Y.
Damn! That's disappointing that they still don't patch the OSD over the video channels so you can see volume and other functions. It is nice that I can get rid of the black and white TV in my gear cabinet!

Top
#97562 - 01/11/18 01:55 PM Re: 976 On Screen Display [Re: jmeno]
XenonMan Offline
Desperado

Registered: 04/08/08
Posts: 2676
Loc: Columbus,North Carolina
You would think that since it has been brought up many times for the other Outlaw processors that they would have addressed it by now. Even my 6 year old cheap Onkyo displays the volume on screen when it is being changed.
_________________________
Music system
Model 990/7500/Magnepan 1.6 QRs/Technics SL1200 MK2/Aperion S-12 Subwoofer/OWA3/Sony NS75H DVD
APC H15 Power Conditioner

TV System
Large Advent Loudspeakers/ Polk center/Monoprice surrounds/Panasonic Viera 42 inch/Onkyo HT-RC260/Sony BDP S590/Directv


Home Theater System
Onkyo PR-SC886/Outlaw 7125 Klipsch RF-82 L/R,RC-62 center, RB-35 SR/SL, BENQ HT1075, Outlaw LFM1-EX/OPPO BDP-83/Directv
Harmony ONE
Blue Jeans and Monoprice interconnects
APC H15 Power Conditioner

Top
Page 1 of 3 1 2 3 >

Who's Online
0 registered (), 53 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
audio123, Dustin _69c10, Dain, REP, caffeinated
8717 Registered Users
Top Posters (30 Days)
FAUguy 2
butchgo 1
Forum Stats
8,717 Registered Members
88 Forums
11,331 Topics
98,703 Posts

Most users ever online: 677 @ 09/27/24 06:41 PM