I recently received my kit (one transmitter / two receivers). I am very impressed with quality and construction. Both transmitter and receivers are small for easy placement. The connections are all gold plate. If I had to rate this product it would prolly go 10 for 10.

I do not have high end equipment or high end test equipment but I am very much into HT and have been for awhile now. I use a PAA 2 to do my set up for speakers and/or subs and have always been happy with the results. I use two subs up front each having its own plate amp. Also I have two types of sub enclosures behind me with plate amps running them.

Upon arrival of the Outlaw kit, I started by simply unhooking the cable that sends the LFE signal to the front subs and connected the kit accordingly. Everything work correctly and the sound was amazingly clear with no interference. However I did register an average 5db loss across the board (20Hz to 100Hz) in output. I then removed the kit and reconnected it to the rear LFE hard line and tested the output from the rear subs. All testing showed a 5db drop in output (same as the front). This can be remedy by adjusting the gain on the receiver so to me this is not really that big of an issue.

By no means am I trying to discredit Outlaw or this device but simple want to let others know my results. As far as I am concern this device operates as describe and I would recommend it to any of my friends who want the easiest way to connect a sub to their HT with running a hard line.

If anyone would like more info please let me know.


BIG’EN