#844 - 02/04/02 11:15 PM
Re: Remote Code
|
Desperado
Registered: 06/29/01
Posts: 894
Loc: Grants Pass, OR
|
Not sure exactly what you're asking, youngguns. Do you have remote operated room lights or something? The 1050 does not come equipped with a learning remote so unless the codes exist in the predefined library, which does include some home automation products, the answer is no.
|
|
Top
|
|
|
|
|
|
#845 - 02/04/02 11:17 PM
Re: Remote Code
|
Desperado
Registered: 06/29/01
Posts: 894
Loc: Grants Pass, OR
|
Leave it to gonk to post while I was rootin' around for my manual! At least we both came up with the same answer!
|
|
Top
|
|
|
|
|
|
#846 - 02/11/02 05:56 PM
Re: Remote Code
|
Gunslinger
Registered: 02/04/02
Posts: 83
Loc: Nunica, Michigan
|
thanks for the help sorry for not getting around to thanking you soner
|
|
Top
|
|
|
|
|
|
#847 - 02/13/02 12:57 AM
Re: Remote Code
|
Desperado
Registered: 01/09/02
Posts: 1019
Loc: Dallas
|
Gary/Gonk
I have the 2100 and after spending 2 aftern. prog. did not want to give it up. I think you just answered my worry about the 950/770, if it works with the 1050, I will assume..
The 'freeze' prob. you both mention has NEVER occurred with mine, have you had your units awhile (mines about 13 months)? Maybe a quality control issue?
And Gonk forgive me, (I’m like the JH coach telling the pro how to fix his pitch) this is something you’ve probably already tried or not what your describing. (Miserable manual!!)
,…but on your macro off, if I remember when I did those codes, I found it was critical "what order" I did them in. Ex: if I had the TV 'power on', I needed next command to go to another unit before I had the TV switch 'sat on', If I didn’t separate these steps the TV was not capable of taking 2 commands in sequence, had to play with my order, of commands' to let each unit handle the timing on a few different issues like this, otherwise the macro could 'drop' a step or two.
|
|
Top
|
|
|
|
|
#848 - 02/10/04 05:00 PM
Re: Remote Code
|
Deputy Gunslinger
Registered: 02/10/04
Posts: 2
Loc: CANADA
|
yes I have lost my codes to control my unit and my remote is out of warranty dose your offer still stand about reprogramming this control Originally posted by Kevin R. Anderson:
You can program a Radio Shack 15-1994 remote, and other All-For-One remotes to fully control the Outlaw, however, it takes a little work.
Remove the battery cover on your 1050 remote, and you will notice a 6-pin plug that is also common to many Radio Shack and One-For-All remotes. By using the "JP1" interface (easy to build or you can purchase for $25) and a free program, you can copy the 1050 remote codes to your computer (or download 1050 remote codes from the JP1 site) and copy them to any other remote with the 6-pin interface.
Like I said, this takes a little work, but check out the JP1 site at http://www.hifi-remote.com/jp1/index.shtml and then check out discussions at http://www.remotecentral.com/cgi-bin/mboard/rc-one4all/list.cgi and look for posts by "The Robman" who essentially invented the JP1 interface.
With the JP1 interface, you will also be amazed at how much programming you can do to the 1050 remote so it operates just about anything else in your system. If you love to tweak and want to eliminate multiple remotes, the JP1 interface can't be beat and it is a lot of fun.
If anyone loses the 1050 codes on their remote (and their unit is out of warranty), I would be happy to reload them to your OEM 1050 remote (or any other JP1 compatible remote) for free, you just have to pay shipping both ways.
In the alternative, if you have a Pronto remote ($250), you can download all 1050 codes (including a nice Outlaw logo) from the Remote Central site.
[This message has been edited by Kevin R. Anderson (edited February 13, 2002).]
|
|
Top
|
|
|
|
|
|
|
0 registered (),
1100
Guests and
1
Spider online. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts
Most users ever online: 1,034 @ 41 minutes 50 seconds ago
|
|
|
|
Previous Topic
Index