I have an Outlaw 970 and I can't get any volume out of it.

When I try to run calibration - if I say yes to test tone and auto sequence - it doesn't sequence.

If I run through it manually I don't get sound either.

Worked last time before I shut it down.

Tried reset.

7125 AMP.

LOL - Of course I went down stairs again this morning and the calibration procedure ran like a charm.

Once that was working - I was able to fix all of my audio inputs (reset changes them I think) and the unit is now in working order.

So what happened? This isn't the "no audio" problem as I understand it. Anybody?

from my experience - nope, that is not the "no audio" problem... the no audio issue for me works like this:

(1) turn on the 970 by hitting Video 3 on my universal remote and there is no sound once the unit powers up - so, I have to turn off the 970 and turn it back on, then I get sound
(2) switching from Video 3 to DVD or DVD to Video 3 and there is no audio, even though the source is playing something - again, turn off and turn back on to resolve the issue....

I'm guessing, but sounds like you might have had a fuse issue or some other circuit protection kick in???


Cheers,

PeteH