I read through the archives and can't find an answer to the following:

I don't seem to have any OSD output from my 1070 in composite, S-video nor component out. I have component cables and an S-video cable on the Monitor Out (even tried a composite cable). In the past, I've switched to Vid 4 (nothing connected), switched my projector input to S-video and been able to see the OSD. I've tried running a composite cable, still nothing. The projector normally states the input in use and the format, the input's correct and the format reads NTSC with a black screen (so the projector is sensing some video signal). I thought maybe the cable but it does the same thing with a good composite cable. I do not have any DVI's going in or out of the 1070. All OSD are turned on. Also tried running a composite out to another TV, still nothing.

I did a full default reset and still had to manually set everything through the front panel display.

Suggestions?

Mark

When in doubt, power it down I guess. Now works fine.