Outlaw Audio home shop products hideout news support about
Topic Options
#68915 - 10/30/08 12:53 PM firmware update ?
Brad225 Offline
Gunslinger

Registered: 12/27/05
Posts: 88
Loc: Tampa Fl
I have not been on the site in a while and was glad to see the much awaited soft ware update had arrived.

I read the threads related to the update and was surprised that there were not as many comments about changes that were achieved. Most were about bass management for 2 channel.

My question is to how the update affected 5.1 or 7.1 depending on your setup. I don't use the 990 for 2 channel only HT.

I will, like many of you will have to disassemble a lot of things to get to the 990 for the upgrade. I don't mind as it is always an opportunity to neaten things up. But if there is not much benefit for HT I will wait until I have other changes that have to make to my system before a surgical strike and down load on it.

Any feedback would be greatly appreciated.

Gonk, sorry to hear about your hip. How is the recovery coming along?

Top
#68916 - 12/03/08 06:36 PM Re: firmware update ?
vp8000 Offline
Gunslinger

Registered: 12/01/06
Posts: 131
Loc: NJ
A very good question as I am in the same situation.
Thanks.
_________________________
Brian

Top
#68917 - 12/07/08 07:27 PM Re: firmware update ?
Brad225 Offline
Gunslinger

Registered: 12/27/05
Posts: 88
Loc: Tampa Fl
Brian
I finished the upgrade and reassembled my system. I was moving it out of my music/HT room. I had to try 2 different computers my lap top would not work for some reason. It meant I had to disassemble the 990 and take it do a desk top in another part of the house.
I would guess having access may be stopping some like my self from the upgrade.

Anyway, I finished the install and reconfiguration then started looking for a movie with some good affects. I found The Matrix and Transformers were playing at that time.
There was a clear difference immediately noticeable. Even with my SMS-1 in the chain there had always been much exaggerated bass at times or there seemed no need for a rumbling of bass during some passages. There is more punch evenly spread out in the room without being exaggerated.

I need to refresh my memory with the manual for the SMS-1 to see if the way it is calibrated will make any difference with this change in the 990.

For anyone still unsure about the upgrade I would highly recommend it.

Top
#68918 - 02/25/09 09:48 PM Re: firmware update ?
vp8000 Offline
Gunslinger

Registered: 12/01/06
Posts: 131
Loc: NJ
Just read this and have still been thinking about it, now I will try to make it a point to do the upgrade in the next few weeks, or...Just might wait and get the 997. Thanks.
_________________________
Brian

Top
#68919 - 03/03/09 09:46 PM Re: firmware update ?
tg3 Offline
Gunslinger

Registered: 07/03/05
Posts: 30
Loc: Seattle
The feature I like best about the upgrade is the ability to rename the audio inputs. laugh
_________________________
It could be worse.

Top

Who's Online
1 registered (govguru), 822 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
audio123, Dustin _69c10, Dain, REP, caffeinated
8717 Registered Users
Top Posters (30 Days)
The Wyrm 3
FAUguy 2
butchgo 2
kiwiaudio 1
Forum Stats
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts

Most users ever online: 1,171 @ 11/22/24 03:40 AM