Registered: 06/10/02
Posts: 524
Loc: Simi Valley, CA, USA
Quote:
Originally posted by gonk: Your setup appears to differ from NRBQLou's. Here are a few things that I think might help you:
Move 12V trigger connection to trigger 1 for main amps.
For watching sources using just the TV speakers, connect each source to the 990 using composite video and stereo analog. Then connect the 990's second zone composite video and stereo analog outputs to an input on the TV.
Set up the MX-800 to use the 990's second zone remote to select inputs, and when the TV is on the right input you will have audio and video from the 990's second zone.
Two choices for volume control: leave the TV volume set at some point and use the 990's second zone volume control, or leave the 990's second zone volume control set at some point and use the TV's volume control. I don't know that it makes a lot of difference which one you do...
I don't know that this list deserves having too much association with the simple part...
Does the main Outlaw trigger send 12v when using Zone 2, if so than my amps would come on and that would defeat the purpose.
Previous Topic
Index