Hi,

I have had my 990 since early May. I think there has been some firmware updates since then. However, I am not sure how I check the firmware level on my system. I have read through the manual and I didn't seem to find anything on listing the firmware level or updating it. Can anyone point me to the procedures to do this? Also, is it worth the time and effort to upgrade to the new level, i.e. is there enough noticeable changes?

Thank You,
Mark D. Rodriguez

The latest firmware version is 3.11, released in the summer of 2006. I don't think that you need a firmware update. To check that, however, you can check the firmware using the following procedure (described in Outlaw's firmware update instructions on their site and in my 990 firmware update notes ): Pressing "SELECT" and "INPUT" on the front panel at the same time while the unit is in standby displays the version number, but be careful because "SELECT" and "MENU" will reset the unit to factory defaults. The version number is displayed as "Version x.xx xx" with the first set of numbers ("x.xx") representing the firmware version (3.11 for the latest release, for example) and the second set of numbers (" xx") reflecting the build date of the particular 990 being updated. That second set of numbers has appeared most often as either "03" or "04".

Thanks Gonk,

I checked my system and it is at 3.07 04, so I guess that means I need an update. I am a little surprised since you are saying the last update was in summer 2006 and I bought my unit in May 2007 I would have thought it would have had the latest update. Would you recommend that I go ahead and update it to the 3.11 level?

Your input is greatly appreciated.

Thank You,
Mark D. Rodriguez

Yes, I'd suggest updating to 3.11.

Mine came with 3.07 firmware, too. So far, this is my only complaint. I'm not sure why a new unit would come with 16 month old firmware. It's not a big deal, except that I have to go and set it up again now that I've updated the firmware to 3.11.

I guess I should have asked to have it updated prior to shipping. I thought about it, but didn't follow through with the request.

Just got mine the other day it too is 3.07.04. But I am having great troubles trying to update via usb. When I get to the dialog box to browse for the "outlaw.inf it is no where to be found. It is in the program files but the install new hardware box won't let me find or select it. All that is in the box is "firmware" which cannot be selected & "990 drivers" which can be but no "outlaw.inf". Any ideas????

Look in the device manager and see if you have an unknown device. If you do, then double click on it, choose the driver tab, and perform the Update Driver. You'll want to select the location. Browse to the file and let it do its stuff.

But I am having great troubles trying to update via usb. [/QUOTE]

I was under the impression from the manual...that firmware upgrades via usb connection was unreliable. Have I missed something and/or has there been success with upgrading via usb?

AK

I updated my 990 right after receiving it, using the USB connection. I had no issues at all. But then, I'm a computer geek!

Like Lee and a number of others, I've also used the USB connection to update my 990 (more than once, actually, since I installed both the 3.10 and the 3.11 updates). You need to pay close attention to the instructions, but it's do-able.