Hi gonk,

I talked with Steve at Outlaw, and he said it shouldn't be doing that at all. "Full Range" to mains shouldn't have any rolloff anywhere.

I agreed to do a system reset, reconfigure all my settings and see if the problem still exists.

After that, he suggested I try reinstalling the firmware. Depending on how I'm feeling tonight, I may try that as well.

If it persists after that, Steve's indicating to me that there's a problem.

So, gonk, if you're up for it tonight, see if you can recreate the problem. It's simple and you don't really need to measure. Just play an analog source in bypass mode. Switch mains between large and small. You should hear no difference. Although I measured it to obtain a little more detail on what's happening, it really wasn't necessary; it's rather easy to *hear* the difference.

I'll repost after the system reset.

Thanks!