I have the 990 connected to the 7125, running 7 Paradigm Reference speakers. I sent my first 7125 back as the right channel was out, and in the meantime, I used my old HTIB Kenwood receiver for a 5.1 setup. I got a 7125 back on Monday as a replacement for the one I sent in, and it still seemed to be giving me problems, so I called and talked with Steve at Outlaw, and it turns out that the interconnect cable was bad, so I replaced the cable and ran the auto-setup.

So, I go about my business and come back into the theater room a couple hours later, and no sound from the front right speaker! I tired changing out interconnects to no avail, and I also tried running the front right speaker off another channel from the 7125, no problem, all is fine. So, I am thinking that maybe the 990's Front Right channel is dead. Any ideas or suggestions?