Outlaw Audio home shop products hideout news support about
Topic Options
#62409 - 10/25/06 02:16 AM another sound problem with 990
jmillerc2 Offline
Deputy Gunslinger

Registered: 10/24/06
Posts: 5
If I turn off my 990 and then turn it back on within 30 seconds or so, I just get static instead of sound from it. To cure this, I turn the unit off with the button in the rear. I need to leave it off for a few minutes.

This has happened regularly since I got the unit a few days ago. Everything is set up fine, since it works well unless I do a start/restart in close succession. Tech support at Outlaw said they've never heard of this. Has anyone else? If not, I guess I should figure this is a defective unit. No sense keeping it only to find the problem worsens after 30 days.

Top
#62410 - 10/25/06 07:29 AM Re: another sound problem with 990
gonk Offline
Desperado

Registered: 03/21/01
Posts: 14054
Loc: Memphis, TN USA
I've never run into that here, and I do shut it down and bring it right back up on occasion (maybe a couple times a month when a macro goes awry).
_________________________
gonk
HT Basics | HDMI FAQ | Pics | Remote Files | Art Show
Reviews: Index | 990 | speakers | BDP-93

Top
#62411 - 10/25/06 11:38 AM Re: another sound problem with 990
jmillerc2 Offline
Deputy Gunslinger

Registered: 10/24/06
Posts: 5
Any idea of what the cause might be, other than a defective unit? I have not upgraded to 3.11.

Top
#62412 - 10/30/06 08:05 AM Re: another sound problem with 990
barend Offline
Gunslinger

Registered: 05/20/05
Posts: 112
I have had regular occasions when my sat receiver's toslink sound was not picked up, and needed a reset.
This happened with all my recent receivers/processors, Marantz, 990, and currently Arcam.
Sometimes it happens with the coaxial input from my DVD too.
So does your 990 exhibits this issue when the last chosen input was analog too?

Top
#62413 - 10/30/06 04:31 PM Re: another sound problem with 990
klthomas Offline
Deputy Gunslinger

Registered: 03/04/06
Posts: 9
Loc: Tampa Bay
I had the same exact problem. If I accidentally turned it off and then turned it back on right away, I would get this awful "digital" noise rather than sound. Turning it off on the back and waiting always cured it. I never did quite isolate exactly why the problem occurred except that every time it happenned, I had accidentally hit the remote and turned it off them immediately turned it back on.

I talked to Scott and he had me install the latest upgrade. this was about a month ago. At the time he said mine was the first he had heard of this but he did log it at the time.

He felt something was corrupted and installing the upgrade would do the trick. So far, no problems since the upgrade and reset.

Top
#62414 - 10/30/06 05:35 PM Re: another sound problem with 990
Craigo87 Offline
Gunslinger

Registered: 10/05/06
Posts: 28
Loc: Camano Island, WA
jmillerc2
Did you do the upgrade yet? Let us know when you do and if it fixed the problem.

thanks,
Craig
_________________________
Eclectic Gear:
HTPC
Outlaw 990 preamp/processor
NEC XG110LC CRT projector
Hafler SE240 pwr amp(2)
Hafler DH220 pwr amp(2)
Magnepan 1.6QR mains
Snell Acoustics EII surrounds
Magnepan SMGc rear surrounds
Velodyne CT150 sub
Panamax 5510 ACRegenerator

Top
#62415 - 11/01/06 09:34 PM Re: another sound problem with 990
jmillerc2 Offline
Deputy Gunslinger

Registered: 10/24/06
Posts: 5
I haven't done upgrade yet. Just got the cable. Super busy weekend ahead. Probably get to it next weekend.

Top

Who's Online
0 registered (), 979 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
audio123, Dustin _69c10, Dain, REP, caffeinated
8717 Registered Users
Top Posters (30 Days)
The Wyrm 3
FAUguy 2
butchgo 2
kiwiaudio 1
Forum Stats
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts

Most users ever online: 1,171 @ Today at 03:40 AM