Hey Gonk,

Been out of town for a few days and just this morning got to play around with the SW 2Ch offset
to fix the 2 Ch audio bass issue.

While doing this I developed a curious issue...

After playing with the Xover settings, settings on my SW, and 990's 2Ch offset. I couldn't get it to sound quite right so i decided to do a new system auto set-up.


After the 990 went thru its paces...it displayed a message that the rear speakers are large and I should switch them with the fronts and start over.

I have all speakers set as small.
Front R&L Xover at 60Hz, Center @ 80Hz, Rear R&L @ 80 Hz. SW is on.

I tried the Auto-set-up 3 times...same result.
Any ideas?

I vote Gonk should get free Outlaw gear for the rest of his life. He is the unpaid technical support for this company.

As far as your question goes, I would say half the people find auto calibration doesn't really work that well. You may be better off buying a SPL meter and doing it manually.

Jed
Thanks for the response.
I think I'll spring for the Radio Shack SPL meter.

Gonk: Sorry if I am abusing you & your enthusiasm to help us.

I've had the same results with the Auto set-up. I went through it, double checked the distances with a tape meausure, and found the distances to be pretty accurate. I calibrated the settings with my SPL and reset the speaker settings and crossovers manually.

Sorry if I made it sound like I thought you were abusing him. Gonk is the man around here. He is going to help you regardless because he is just a good guy. I was just telling Outlaw he should be compensated. I doubt he would agree with that, but I do.

Gonk should at least get to beta test if he wants to do it. Then, if it's good outlaw should do as suggested above.

So GONK gets my vote.
Of course don't forget Scott & Steve.
They are always helpful, too.
Just that gonk isn't in the employ of outlawaudio.

i think outlaw should know that gonks reviews on the 990 , helped me to deside to try the 990 and 7125, outlaw owns him one from me at least

I learned about Outlaw from the Polk Audio forums in December when I was researching speakers. Since then I have been reading the Outlaw Saloon. I would say that Gonk is about 85-90% of the reason that I purchased the system. Reading posts from an owner that loves what he has and is willing to share his experience with others (in depth) and help other owners really helped me to purchase the Outlaw equipment.

me too...I was riding the fence new 990 or used anthem avm20..Gonk was the deciding factor to order a 990.
Should he here next week.......

Vince

me too, I have said it before and i will say it again Gonk is a huge asset to these forums, he helped me with my sms-1 and icbm and was also my deciding factor with purchasing the 7125 and 990