Registered: 01/31/04
Posts: 81
Loc: Bartlesville, OK USA
Hello, I was wondering if you have a universal remote, actually its a learning remote, and i've taught it most of the 950's commands, will moving to the 990 require relearning, or will it use the same commands as the 950 ?? thanks alot, reade.
gonk
Desperado
Registered: 03/21/01
Posts: 14054
Loc: Memphis, TN USA
Some of the stuff will be the same (volume, numbers, navigation buttons), but others will need to be re-learned (input commands, surround modes, tuner controls).
I've seen references to various comprehensive remotes on this forum. Question: Has anyone been able to use the features of dishnetwork's model 721 sat receiver with Outlaws 990 remote. Any experience with dish 721 receivers and other universals. Thanks.
_________________________
Living Room: 5.1 Surround and 4channel inline room 990/7700/6-KEF-107s/LFM1 x 2/ SMS Awaiting Trinnov Millenium dts decoder;Digital Director Players: Tascam CD01U/SonyCX455 x 3/DV955/BDP83 Old Sony 60" SXRD TV Zone 2 (also liv-Room: listening to music while Mrs watches TV): Crown SL2 preamp/D40 Amp/Stax Headphones
My "Man-cave": 4 channel-only inline room. No TV (thank heaven)!!! 990/755/4-KEF 107s Tascam CD01U/dts decoder/digital director Alesis 16x4x2 mixer Recorders Alesis HD24/ML9600/Crown CX844s/SonyDAT/Tascam DA38 Ham Radio Shack (KB1STH) ICOM/Yaesu/Drakes x 3
Registered: 05/02/02
Posts: 526
Loc: Home on the range
Readster, if you have a pronto or mx-700 there are files available for them. (I have the mx 700 file but I would be more than willing to let somebody host them).
Trying to decide between the Theater Master MX-700 and MX850 with the MRF-250 RF Receiver.
Since my equipment is beside me (rack about 6 ft to the left) and the projector is above and behind me, I was wondering if anyone else has had luck with the MX-700 without to much "pointing" involved. Right now with the stock remotes that came with the equipment, you have to point remotes in every direction...
Previous Topic
Index