Outputting analog video to DVI involves some serious video processing - we're talking about converting the video from analog to digital, potentially converting it to at least 480p (I'm not sure that DVI supports 480i resolution, since all of the DVI-equipped DVD players I've seen are unable to output 480i), and then making sure the whole process remains HDCP compliant since you are now generating DVI signals rather than simply switching them. That's some mighty serious heavy lifting.

It would not be a problem for me as my cable box has DVI and my DVD player has DVI. I just wished if that is the case why not have two component outputs, that should be a no-brainer. Now if I want to watch XBOX on the big screen I have to disconnect one and connect another.

From the gallery shots it appears the 990's main remote is a re-labeled 1050 remote.

I had considered getting a MX-500 learning remote, but my 1050 remote does everything I need and I don't have to worry about the kids destroying it!

Oh, and our XBOX is hooked up via the standard RF converter supplied with it. The cable from Adelphia goes into the VCR, another goes from the VCR to the XBOX RF adapter then into the tv's coax/ant in jack. Put the tv on channel 4, turn on the XBOX, and voila'!

So, does anyone know what "2 channel subwoofer offset" is?

Maybe some type of phase adjustment?

I'm not sure about the 2-channel offset, but the new FAQ does touch some on the 990's auto setup. It does not include automatic EQ. The FAQ says the following about why:

As for Jeffrey's XBox frustration, I can understand the headaches involved in running two separate displays, although I'm not doing so myself (lucky to have just one HD display in the den, to be honest). A source like the XBox creates a problem there, since it only has one video output and an HDTV owner is going to want to set that output up as a component connection to get the full benefit of the console. It's a problem you could run into with many receivers or processors, and I'm not sure what I'd do in Jeffrey's place - maybe a switch box directly after the XBox (or possibly after the 990) to split it into two signals, assuming the switch box doesn't degrade video quality (which could be a challenge, since we're presumably dealing with 480p or higher resolution from the XBox).

Hello All,

2-channel sub offset allows you to reduce your subwoofer trim level by up to 8dB automatically when you switch to stereo mode. Bass management on the front L/R must be engaged for this feature. This feature allows you to have one sub trim setting for 2.1 channel music and another for surround sound.

Scott

faq was very informative... if i havent said it before, this site is very well laidout.