Outlaw Audio home shop products hideout news support about
Topic Options
#47637 - 08/19/03 05:22 AM 950 and Atlantic Technology P2000
haltepinken Offline
Deputy Gunslinger

Registered: 08/19/03
Posts: 1
Loc: Norway
Hi there
Anyone who have compared the inside of an Outlaw 950 with an Atlantic Technology P2000?
Are these identical products?
Any differences in the quality of the electronic components?
What about the Sherbourne model?

Top
#47638 - 08/19/03 09:21 AM Re: 950 and Atlantic Technology P2000
gonk Offline
Desperado

Registered: 03/21/01
Posts: 14054
Loc: Memphis, TN USA
Excellent question. Unfortunately, after several debates here (such as this one ) we have not been able to come up with real definitive answer. The short answer is that they are very, very close to identical products. The features are reportedly identical on all three (Outlaw, AT, and Sherbourne), quirks and all. The component video switching bandwidth is reportedly higher on the clones than on the 950, and there are some different grade components used on the clones, although I don't know if there is a detailed list of such components around.

------------------
gonk -- Saloon Links | Pre/Pro Comparison Chart | 950 Review
_________________________
gonk
HT Basics | HDMI FAQ | Pics | Remote Files | Art Show
Reviews: Index | 990 | speakers | BDP-93

Top
#47639 - 08/24/03 05:02 AM Re: 950 and Atlantic Technology P2000
BillP Offline
Deputy Gunslinger

Registered: 07/26/03
Posts: 3
Loc: Palo Alto, CA
One problem with reverse engineering the internal differences between the three units is that often higher quality components are created, not by using different parts, but by using "higher binned" parts. Thus you may not be able to see any differences by looking at the components.

All electrical components have some degree of variance in their adherance to original specs. These variances have a distribution much like IQs in people have a distribution.

It is possible that a company like AT/Sherbourne buys 100 pieces of a component just like Outlaw would, but then AT/Sherbourne picks the best 75 while Outlaw uses all of them (or Outlaw uses the best 90).

If there were many such different components for which Outlaw was less picky, most, if not all, Outlaw units would possess worse overall performance characteristics than their AT/Sherbourne brethren.

The result for AT/Sherbourne would be a higher product cost but tighter quality standards resulting in, for example, flatter frequency response, less noise, or higher MTBF (mean time between failure).

So, just because someone spends a few hours visually studying the internal differences between these units and finds them to be "identical" does not mean that they are.

BTW: To help dispel any belief that I am an AT or Sherbourne shill .... Even if there are performance differences, I believe that they would be too subtle to make them worth the 50%-100% surcharge - so just get the Outlaw!!


Bill

[This message has been edited by BillP (edited August 24, 2003).]

Top

Who's Online
0 registered (), 488 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
audio123, Dustin _69c10, Dain, REP, caffeinated
8717 Registered Users
Top Posters (30 Days)
The Wyrm 3
FAUguy 2
butchgo 2
kiwiaudio 1
Forum Stats
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts

Most users ever online: 1,171 @ 11/22/24 03:40 AM