I've had my 1050 for sometime and have been very happy with it. I was wondering if anyone knew of updated codes for two pieces of equipment I have.

They are:

Sony DVP-S9000ES
DirectTV digital satellite receiver

Of course I haven't tried the 'search' code process yet, but thought maybe I could save a little time.

Thanks in advance

Have you tried http://www.remotecentral.com

They have tons of codes there.

It look s like a good possibility, but what brand of remote is the 1050? I thought I had seen it somewhere before, but I can't remember.

Thanks

jp1 is the type.

not sure the brand,i never had the original

The 1050 uses a Catalyst48 remote (as do the 990 and 1070, although those two use a newer version of the Cat48). The Catalyst48 uses the code library and JP1 programming capability used by the Radio Shack and One-for-all remotes documented on Remote Central.

Thanks gonk. To verify, I need to go to the http://www.remotecentral.com/ site and select the 'Universal Remote Codes' area and select either the 'Radio Shack' or 'One for All' links and that should take me to pages that give me codes to try for my 1050 remote?

I went to the 'One for All' page and it seems all there remotes start with URC and I did not find a JP1 on there. Am I mistaken as to what to look for? The 'Radio Shack' link just brings up a text page from them and it does look like the codes that Outlaw used but I didn't see anything on there for my satellite receiver, and I have tried the Sony code they had, and Outlaw uses as well, for my DVD (0533) and had no luck with it.

I think I had tried this code before to use with my DVD, as I have had it for a while, and it didn't work then, so I just used my Sony DVD remote to operate my DVD and the Outlaw remote to control volume.

Any other ideas as to what I should do? Is the JP1 what I need to look for at the 'One for All' site?

Thanks again.

http://support.radioshack.com/support_video/doc73/73017.pdf

see what you can find here,these are the codes i use with my rs remote and 1050,CAL,dish,etc.

i did see a bunch of 'direct tv' codes,but you might need to be brand specific like i had to be for my 'dish network' receiver.

good luck

Ah, I'm apparently losing my mind - the site I was thinking of was Hi-Fi Remote . "JP1" refers to the PC interface used by the URC remotes (both Radio Shack and One for all), and that site focuses solely on those remotes. Codes can be found here .

gonk,i'm sure you will find it again.take a break,you work 2 hard!

Thanks guys. painttoad, thanks for the Radio Shack PDF page, it had a lot of codes to try, but unfortunately none of them worked. Not a problem.

And a big thanks to gonk for the Hi-Fi Remote link. None of the codes there worked, but obviously the JP1 interface is the way to go next. It will put me out about $15 for the cable and shipping, but the whole group looks like they will be able to help me, if they don't already have the files for my equipment.

Thanks again guys. You've been a big help.