bossobass
I'll do the best I can. From what I understand, the bass management on the 950 in general is handled in the digital domain (which is part of why stereo analog inputs are converted to digital normally). For the six-channel input, the signal
must remain analog or the entire purpose of the input (i.e. an analog "pass-through") is defeated. Therefore, the bass management on that channel is being handled with analog crossover circuits (low-pass and high-pass filters).
If you have a stereo signal sent to the six-channel input, the filters will pass material below 80Hz to the subwoofer channel. If the bass management switch is on, a separate filter will remove material below 80Hz from the left and right channels as well.
------------------
gonk -- Saloon Links |
Pre/Pro Comparison Chart |
950 Review