Outlaw Audio home shop products hideout news support about
Topic Options
#37662 - 07/07/02 10:35 PM MX500 owners: Sat button won't learn.
Patrick Collins Offline
Deputy Gunslinger

Registered: 01/11/02
Posts: 7
Loc: San Jose, Ca
While programming the 10 device buttons on my MX500 remote, I had success except for the SAT button. Has anyone else had the same experience? Unfortunately on my 950, that's the most used device. This could be a deal killer. Othewise I like this remote a LOT.

TIA
Patrick

------------------
Patrick
_________________________
Patrick

Top
#37663 - 07/08/02 02:12 AM Re: MX500 owners: Sat button won't learn.
Jed M Offline
Desperado

Registered: 05/02/02
Posts: 526
Loc: Home on the range
Patrick, I have the mx500 and I have not had any problems learning my Directv Toshiba DST3000 commands under the SAT button. It sounds like it could be a problem with your remote. Have you tried to manually learn each button individually or have you just tried the preset codes? I'm sure we can figure this out.

Top
#37664 - 07/08/02 06:04 PM Re: MX500 owners: Sat button won't learn.
Patrick Offline
Deputy Gunslinger

Registered: 05/07/02
Posts: 8
Loc: San Jose, Ca
I should clarify. The button in question is the device button on the MX500 that says SAT. It needs to learn the code from the 950 remote that also says SAT. There are no preprogrammed codes for the 950 in the MX500. I've already taught the MX500 other device codes like DVD, CD, TV etc. I even taught the MX500 "SAT" button to learn the code for the 950 TV device button. It's like the 950 isn't putting out any code from the SAT button.

That alone lowers the WAF.

------------------
Patrick
_________________________
Patrick

Top
#37665 - 07/08/02 11:54 PM Re: MX500 owners: Sat button won't learn.
LQQK Offline
Gunslinger

Registered: 03/22/02
Posts: 48
Loc: Earth

Top
#37666 - 07/10/02 10:01 PM Re: MX500 owners: Sat button won't learn.
Dan Hitchman Offline
Gunslinger

Registered: 06/17/01
Posts: 103
Loc: Fort Collins, CO USA
I have the same problem teaching it the Video 1 button command from the Outlaw remote. Nothing I do will get it to work. All the other buttons I taught it are working fine, but not that one.

Getting frustrated!

Dan
_________________________
Down with the MPAA!! They are robbing you of your rights in the name of greed!

Top
#37667 - 07/11/02 02:38 AM Re: MX500 owners: Sat button won't learn.
Dzung Pham Offline
Gunslinger

Registered: 02/16/02
Posts: 21
Loc: Maryland
No problems here learning the Sat/Video1 button with my MX500. Try leaving the Sat button down longer when it is learning or some other variation on how long you press it. Sometimes it takes a few tries to get it right. Also, press AUD before learning to make sure the remote is in the right mode.


[This message has been edited by Dzung Pham (edited July 11, 2002).]

Top
#37668 - 07/11/02 12:45 PM Re: MX500 owners: Sat button won't learn.
Patrick Offline
Deputy Gunslinger

Registered: 05/07/02
Posts: 8
Loc: San Jose, Ca
Dzung,
I thought the VIDEO/SAT button was a single funtion button and it put out one code no matter what mode you were in previously.
I'll try depressing the MX500 SAT button for different durations to see if that makes a difference.

Thanks
_________________________
Patrick

Top
#37669 - 07/11/02 01:44 PM Re: MX500 owners: Sat button won't learn.
LQQK Offline
Gunslinger

Registered: 03/22/02
Posts: 48
Loc: Earth
If you go here: http://www.remotecentral.com/cgi-bin/mboard/rc-master/list.cgi you will get the info you need.

LQQK

Top

Who's Online
0 registered (), 653 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
audio123, Dustin _69c10, Dain, REP, caffeinated
8717 Registered Users
Top Posters (30 Days)
The Wyrm 3
butchgo 2
FAUguy 2
kiwiaudio 1
Forum Stats
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts

Most users ever online: 900 @ Today at 03:23 PM