#33971 - 09/02/03 04:58 PM
7100 vs 755 for atlantic technology 450?
|
Deputy Gunslinger
Registered: 03/18/01
Posts: 9
Loc: Dublin,CA
|
Hi I'm trying to choose the best amp for my setup. I only need five channels at the moment, so I am looking at the 7100 or the 755. My speakers are Atlantic Technology 450 THX (89 db sensitivity, 100-200 watts). Would the 7100 be enough to power them?
|
Top
|
|
|
|
|
#33972 - 09/02/03 09:58 PM
Re: 7100 vs 755 for atlantic technology 450?
|
Gunslinger
Registered: 01/27/03
Posts: 116
Loc: San Diego, CA
|
The 7100 would be enough, you will find them to power your speakers for the full range well if your speakers are 8 ohms or less nominal. If your speakers run above 8 ohms, then you will want to go with the 200W amps. For instance, a speaker may be rated for 8 ohms, but in real world testing, it may run nominal at 6 ohms or even 10 depending on the test. Something to look into for yours so you can be sure if they are in need of more or less. Of course, if you don't know, the buying the bigger amp is always a sure thing, ie the 755 and then adding something like the 200's later.
|
Top
|
|
|
|
|
#33973 - 09/03/03 12:48 AM
Re: 7100 vs 755 for atlantic technology 450?
|
Deputy Gunslinger
Registered: 03/18/01
Posts: 9
Loc: Dublin,CA
|
Which amp would sound better? I want my speakers to sound the best, but if the bigger amp is not going to make a difference in sound then I don't want to waste the money. I know that a bigger amp will have a bigger reserve of power when needed, but would my speakers ever need it?
|
Top
|
|
|
|
|
#33974 - 09/03/03 02:08 AM
Re: 7100 vs 755 for atlantic technology 450?
|
Gunslinger
Registered: 01/27/03
Posts: 116
Loc: San Diego, CA
|
The two will sound similar up until a point in power, then if your volume you listen at goes above this point, then the 100watts will start to intro distortion as you exceed its natural limits. So the question is, how loud do you play them. Couple this with what is the bandwidth that you send to your speakers, if your running the mains below 100Hz, then you really need the extra power.
|
Top
|
|
|
|
|
#33975 - 09/03/03 04:01 PM
Re: 7100 vs 755 for atlantic technology 450?
|
Deputy Gunslinger
Registered: 03/18/01
Posts: 9
Loc: Dublin,CA
|
I like to be able to run at the reference point(75db) or sometimes a little louder for demos :-). My speakers can only go down to 80hz, so that is the cross over point. Everything below goes to a self powered subfire sub.
So I guess in my case the 7100 would be enough. Thanks for your input.
|
Top
|
|
|
|
|
|
0 registered (),
979
Guests and
1
Spider online. |
Key:
Admin,
Global Mod,
Mod
|
|
|
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts
Most users ever online: 1,171 @ Today at 03:40 AM
|
|
|
|