Thanks Roland; that's what I'll do.

Thanks to everyone else for all your input. Amps already at the local Fedex....might get them today.

Thanks Roland; that's what I'll do.

Thanks to everyone else for all your input. Amps already at the local Fedex....might get them today.

In this thread we discussed the Radio Shack 42-2420 . I use 5 of them (and a random cable I had laying around) to have my 950's 12v trigger turn my M200s on and off.

At $3.29 each for complete cables, I couldn't justify the effort of DIY for trigger cables. The aforementioned thread goes through some parts you could use if you are inclined to DIY.

Here's one more question; the manual says that you cannoct connect more than two amps with the 12v trigger; does anyone have 3 amps connected like this? Is there a ny real risk?

Txs.

The manual does say that, but Outlaw has said in the past that more than two amps will work depending on the amps in question. The signal is degraded somewhat each time it is split or passes through an amp (some amps, such as the M200's, have a trigger input and output), but most amps don't require the full 12V of signal to flip from "0" (off) to "1" (on). Whether having three or more will work depends on the sensitivity of the amp's trigger. The two amp limit in the manual is a "pretty much guaranteed" to work limit.

I got one today. The other is stuck in Ohio for some reason.

I used the one to drive my center channel, an Axiom Vp150 6 ohm.

There IS a difference. To my ears it sounds cleaner. Even at low levels (65 dB)! It's too late for high volume. I'll try that in the morning.

Is there a deal on the third mono if you order it a couple of days later?

Wonder what the wife will say when I tell her I'm ordering another. "Maybe they shipped a third by mistake?"

Very pleased. Can't wait to try monos on the mains.

Give 'em a call and ask. Can't hurt, right?

Same deal. 3rd Mono ordered.

Nice....

Do M200 take dual banana plugs?