Semi-novice question - I currently own a 1050 (w/ICBM) - am considering adding the 755 - I think I read somewhere that the center surround output on the 1050 can be used in conjunction with the 755 to retain the 6.1 - any experience/comments on this arrangement? Anything special I should know about hookup/setup?

I did basically the same thing using a 750 (the 755's predecessor) and a 1050. The 755 can be used to drive the fronts, center, and surrounds (just connect the 1050's respective pre-amp outputs to the inputs on the 755), while the 1050's internal amplification is still used to drive the surround back speaker (just leave the surround back speaker connected directly to the 1050). With no other channels driven, I think the rated output for the surround back channel goes up to around 90W. I used that arrangement successfully for several months before adding a used two-channel amp for the surround back speaker and replacing the 1050 with a 950.

------------------
gonk -- Saloon Links | Pre/Pro Comparison Chart | 950 Review

Gonk, thanks so much for the reply, that pretty much clears it up for me - time to haul out the checkbook!