Outlaw Audio home shop products hideout news support about
Page 2 of 3 < 1 2 3 >
Topic Options
#14756 - 03/07/05 08:10 PM Re: Need inwall speaker wire suggestion..
Iggy The Dog Offline
Gunslinger

Registered: 02/28/01
Posts: 101
Loc: The Dog House
Gonk-o-rama:

Scratching at walls in attempts to play like one of those damnable felince creatures has given me experience in wiring in walls. (It doesn't taste too good.)

Hullguy is correct, though depending on your local building codes YMMV. The NEC is almost always the basic guide, but in some jurisdictions there are "local ammendments" that say if plain-old "CL-3" wire is good for in-wall residential use, or if you need "R" or "P" rated wirings. He's also correct that the ability to NOT use "R" or "P" cable only exists with true fire-rated (read metal) conduit. If the plastic conduit isn't fire rated, then it's a nice convenience for running wires, but doesn't help with fire codes.

More than anything, what works or doesn't is based on codes, local law and at the end of the day it REALLY boils down to whether or not the inspector is in a good mood or not. After I bit the local inspector when my master and mistress were building me a new house, it resulted in a red ticket even though things were OK. Talk about being sent to the dog house!

But what do I know, I'm only a dog...

ARF ARF, says Iggy!
_________________________
But what do I know, I'm ONLY a dog!

ARF, ARF says Iggy

Top
#14757 - 03/08/05 12:10 AM Re: Need inwall speaker wire suggestion..
ScottH Offline
Gunslinger

Registered: 10/07/02
Posts: 83
Loc: NY, NY, USA
Sraber,
The Canare 4S11 has four 14 AWG conductors. When you use two of the conductors for the red, and the other two for the black, you have 11 gauge.

So, if you want at least 12 gauge cable, and you are going to bi-amp, you'd need to run two lengths of the 4S11 for each speaker.

Top
#14758 - 03/08/05 08:01 AM Re: Need inwall speaker wire suggestion..
gonk Offline
Desperado

Registered: 03/21/01
Posts: 14054
Loc: Memphis, TN USA
Hullguy and Iggy - You guys make some excellent points. It makes sense to not need plenum-rated in a residential installation. Clearly I need to unhook the work mindset a bit more completely from time to time. smile
_________________________
gonk
HT Basics | HDMI FAQ | Pics | Remote Files | Art Show
Reviews: Index | 990 | speakers | BDP-93

Top
#14759 - 03/08/05 08:35 AM Re: Need inwall speaker wire suggestion..
sraber Offline
Gunslinger

Registered: 10/11/04
Posts: 183
Loc: Green Bay, WI
Thanks for all the replies, folks. So I've been searching far and wide for this 12/4 speaker wire and not had a whole lot of luck. I found one brand that I've never heard of before and Monster to the tune of 3+ bux a ft. So now I'm thinking I might be better off running a pair of speaker wires to each speaker. I'd like to stick with 12 gauge. Any suggestions for a nice wire at a reasonable price? I'd like to try to keep it below a buck a ft., no more than 1.50 a ft.

I see that belden 5000UE can be had for about .39/ft. But I was also intersted in this offering from Axiom Audio @ .85/ft. Any thoughts?

As always TIA,

simp
_________________________
Marantz av7005 Proc.
Oppo BDP-83
Rotel RB-991 (mains)
Outlaw Audio Model 2200 (center)
Rotel RMB-1075 (ss, rs)
f, B&W DM604S3
c, B&W LCR600S3
ss, B&W DM302
rs,Polk M3II
HSU VTF-3 MK3
APC H-15 Power Conditioner
Display: Panny PT-AE4000 Proj. + 92" DIY Screen
Little Dot MKIII Headphone Amp
Denon AH-D1100 Headphones (needed a quick, cheap set. looking for an upgrade worthy of the h/p amp.)

Top
#14760 - 03/08/05 11:30 AM Re: Need inwall speaker wire suggestion..
steves Offline
Desperado

Registered: 06/18/01
Posts: 356
Loc: Oregon
Hello sraber.. You might try googling "UL CL3" (UL rated NEC listed CL3) and see what comes up.. You'll find lots of sources for in-wall wire. Blue jeans cable has some good info about what the codes actually mean and how they might affect what you are trying to accomplish. As others have said, you should check with your local building department to see how they interprate the codes before starting. Good luck!

Top
#14761 - 03/08/05 04:48 PM Re: Need inwall speaker wire suggestion..
Hullguy Offline
Desperado

Registered: 01/17/02
Posts: 380
Loc: South Weymouth, MA USA
Electricians point of view again! We just had the gentleman who installed the speakers at the Fleet Center, (soon to be called TD Banknorth Garden), come in for an audio tune up. The question of wire for speakers arose in conversation. At the risk of starting a wire war, his opinion was "some people think they hear a difference in the wire they use!" It is all copper after all. I'd do the Google search Steve suggested and buy a cable NOT based on a brand name. Save some money on the wire and splurge on the source. Jim

Top
#14762 - 03/08/05 11:10 PM Re: Need inwall speaker wire suggestion..
jeffdavis Offline
Gunslinger

Registered: 08/08/03
Posts: 98
Loc: Columbia, SC
sraber,
I've not purchased any of their wire yet, but these guys' products look interesting. And at $1.40/ft. for 12/4 twisted pair, it does come in under your maximum, but just barely.

Jeff

http://www.knukonceptz.com/productDetail.cfm?prodID=KAR124BLS
_________________________
HT: Outlaw 975/7125 | Sony 55" SXRD | Roku Ultra | Sony BDP-S790 | Mirage OMD-15 (fronts) and Prestige 4 + Center Channel | Outlaw LFM-2
LR: ARC Reference 1 | Emotiva XPR-2 | Music Hall MMF2.2 | Oppo BDP-83SE | Polk XRt12 XM Receiver | Emotiva XDA-1 DAC | Sony HAP-S1 (digital audio player) | Sansui TU-217 Tuner | Magnepan 3.6R w/Mye-Stands | SVS SB-16 sub | BA VR-M90s | Audio Quest 72db speaker cable
Office: Drobo 5N running as PLEX media server
Closet: too many pieces to put all into place, I need more rooms smile

Top
#14763 - 03/09/05 08:28 AM Re: Need inwall speaker wire suggestion..
avlis Offline
Gunslinger

Registered: 07/16/04
Posts: 33
I have to say the Fleet Center has an amazing sound. I've attended two concerts plus Bruins and Celtics games. Each time I've felt that I was sitting in my living room. I searched the Fleet Center website hoping to find some info on the design and equipment used in the system. No luck.

I saw garth Brooks play the Fleet many years ago. A few months after, I saw the same show at a venue in NC. It sounded so bad that I left 1/2 way through.
_________________________
950/7100/LFM-1
Tyler Acoustics Freedom F3,F1,FC1
Panamax M-4300
Auralex MoPADs & GRAMMA

Top
#14764 - 03/10/05 06:03 AM Re: Need inwall speaker wire suggestion..
Hullguy Offline
Desperado

Registered: 01/17/02
Posts: 380
Loc: South Weymouth, MA USA
Avlis, all the concerts who come to the Fleet Center bring there own speaker and sound set ups tailored the way the show wants. Sometimes, like with AC/DC half the speakers hung by the stage are fake! The House speakers you hear at a game are Eastern Acoustic Works driven by Crown amps. Jim

Top
#14765 - 03/10/05 10:42 AM Re: Need inwall speaker wire suggestion..
rance Offline
Gunslinger

Registered: 06/09/04
Posts: 99
Loc: Boston. MA
Yeah, but nothin can beat the sound of the old Garden! laugh

Top
Page 2 of 3 < 1 2 3 >

Who's Online
0 registered (), 501 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
audio123, Dustin _69c10, Dain, REP, caffeinated
8717 Registered Users
Top Posters (30 Days)
The Wyrm 3
FAUguy 2
butchgo 2
kiwiaudio 1
Forum Stats
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts

Most users ever online: 1,171 @ 11/22/24 03:40 AM