Outlaw Audio home shop products hideout news support about
Topic Options
#10188 - 01/04/09 03:48 PM whole house surge protector vs. local surge protection
gooomz Offline
Gunslinger

Registered: 02/28/06
Posts: 258
Loc: new york
if i get a whole house surge protector at the main electric box, do i still need a protector at my rack system?

any suggestion for brands on whole house surge protection?

Top
#10189 - 01/04/09 06:42 PM Re: whole house surge protector vs. local surge protection
DuggieFresh5 Offline
Gunslinger

Registered: 01/25/07
Posts: 19
Loc: Cleveland, OH
For your consideration:

Surges can also come through antenna, satellite, or cable hookups in the event of an electrical event; such as lightning strikes in the area.

Some local protection devices also feature surge suppression for these types of hookups.

Top
#10190 - 01/04/09 09:09 PM Re: whole house surge protector vs. local surge protection
Hullguy Offline
Desperado

Registered: 01/17/02
Posts: 380
Loc: South Weymouth, MA USA
Whole house surge suppression has worked for me for 10 years now, (except for the wireless dog collar!).
I used a special type of circuit breaker to cover my whole house. You should have a licensed Electrician install this. It doesn't take long in most instances.

The advantage to using a surge suppressor at your rack is the various devices you plug in offer higher amounts of insurance if they don't protect your equipment properly and you can insyall them yourself.

Surge suppressors don't last forever and do need to changed out after a period of time!

Here's a few links.
http://www.leviton.com/OA_HTML/ibeCCtpItmDspRte.jsp?sitex=10021:22372:US&item=7034
https://www.sea.siemens.com/pde/TVSS/Sentron_TPS_Specification_Sheets.pdf
Look from TPS 9 on

Top
#10191 - 01/04/09 09:43 PM Re: whole house surge protector vs. local surge protection
XenonMan Offline
Desperado

Registered: 04/08/08
Posts: 2676
Loc: Columbus,North Carolina
Do the whole house devices regulate line voltage or automatically act to protect your equipment? Do they protect phone and satellite/cable lines coming in? I suspect your equipment will be better off with the local device and it will probably be easier on your wallet. You can get a real good device for less than $500 which will also regulate the incoming voltage to your equipment. I have an APC H15 power conditioner which I have thanked many times for protecting my equipment in thunder storms.
_________________________
Music system
Model 990/7500/Magnepan 1.6 QRs/Technics SL1200 MK2/Aperion S-12 Subwoofer/OWA3/Sony NS75H DVD
APC H15 Power Conditioner

TV System
Large Advent Loudspeakers/ Polk center/Monoprice surrounds/Panasonic Viera 42 inch/Onkyo HT-RC260/Sony BDP S590/Directv


Home Theater System
Onkyo PR-SC886/Outlaw 7125 Klipsch RF-82 L/R,RC-62 center, RB-35 SR/SL, BENQ HT1075, Outlaw LFM1-EX/OPPO BDP-83/Directv
Harmony ONE
Blue Jeans and Monoprice interconnects
APC H15 Power Conditioner

Top
#10192 - 01/04/09 10:39 PM Re: whole house surge protector vs. local surge protection
Hullguy Offline
Desperado

Registered: 01/17/02
Posts: 380
Loc: South Weymouth, MA USA
The whole house protectors I listed only protect the power side.
There are other devices for coax and phone such as
http://www.intermatic.com/Default.asp?action=subcat&sid=269&cid=100&did=6
And this
http://www.intermatic.com/Default.asp?action=subcat&sid=268&cid=100&did=6
This one does everything
http://www.intermatic.com/Default.asp?action=subcat&sid=137&cid=61&did=6
About $200

Top
#10193 - 01/05/09 02:34 AM Re: whole house surge protector vs. local surge protection
TooManyHobbies Offline
Gunslinger

Registered: 12/23/08
Posts: 51
Loc: XXX
Considering that most homes have 200 amp electrical service, a whole house system would mean needing protection for 24,000 volt-amps or watts (if power factor is not considered). That equates to a very large (and from my perspective, expensive) device. I am mostly familiar with industrial line conditioners that are typically isolation transformers with additional filtering and do more than surge suppression. For one of those capable of a few thousand watts, still far less than 24,000, the cost was several thousand dollars nearly 20 years ago. Considering that most household loads are not sensitive to surges short of a lightening strike, whole house protection is not really cost effective just to protect a few, relatively small, but sensitive electronic loads.

Over the years, I've encountered computers and other sensitive electronics that suffered from baffling intermittent or irregular failures. After some frustration, an AVR type line conditioner was installed and completely cured the problems. While I have no experience indicating an AV system would benefit from an AVR line conditioner, it seems plausible that this might be a worthwhile addition. I've had success with Tripp Lite and APC systems that are relatively inexpensive, and with the APC systems can be combined with a battery backup to prevent loosing a video recording due to a power outage.

As noted, power conditioners only protect equipment from power surges. Other devices would be required for rf and phone lines. When I used an outdoor antenna, I did install a surge protector in the coaxial downlead, but I've used no other protective devices in my systems over the years. While my experiences may not be typical, I have had no surge-related failures to any equipment attached to rf or phone. I have used a cable provider for all communication services for some time with no additional protection in areas that receive severe electrical storms. The cable and phone companies have surge protection to protect their inline equipment, so the likelihood of a surge being transmitted through the line is quite small. A ground transmitted or induced surge from a direct or near lightening strike is much more likely than one coming down the phone or cable. However, protective devices can be acquired quite inexpensively to provide additional peace-of-mind. I have heard rumors over the years that such devices are everything from ineffective at blocking surges to having an undesirable effect on audio and video, none of which I have personally substantiated. I have not noticed any anomalies in my system over the years using various surge suppressing power strips including the two Belkin ones currently in my system. However, these were purchased for their relatively low cost, number of outlets, power rating, and heavy-duty cord over any claims for surge suppression.

Most household surge suppressors feature MOV devices that are designed to switch above a certain voltage and shunt the excess energy to ground, bypassing the equipment connected past the MOV. The MOV device has a certain capacity rated in joules or amps. Surges caused by lightening can be far greater than the MOV capacity. In this case, two things can happen: the MOV will fail open or fail shorted. If it fails shorted, the circuit protection device, aka circuit breaker or fuse, will open (trip or "blow"). If the MOV fails open, the surge continues down the line into all of the equipment connected to the suppressor. Also, if the MOV fails to switch quickly enough, a very good possibility with lightening-caused surges, the energy will still get past the MOV and to the equipment before the MOV can react. In my opinion, the manufacturers and retailers of common surge suppression devices and their insurance providers are relying on the relatively low probability that any equipment attached to their devices will actually ever see a surge, and, as a result, they'll have a low probability of ever having to pay out a claim.

I am curious, though; has anyone filed a claim regarding a surge suppressor failing to protect their equipment, and how was the payment response on the insurance?

Best regards,
Bill

Top
#10194 - 01/05/09 10:18 AM Re: whole house surge protector vs. local surge protection
Hullguy Offline
Desperado

Registered: 01/17/02
Posts: 380
Loc: South Weymouth, MA USA
There is a difference between a power conditioner and a surge protector. Power conditioning is supposed to give you a pure sine wave, removing all the harmonics and distortions that can be present. These devices are more costly and usually the best device to do this is an UPS.

Surge suppression only protects against higher voltages that could be induced over your power lines.

I agree with everything else TooManyHobbies has written.
Jim

Top

Who's Online
0 registered (), 653 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
audio123, Dustin _69c10, Dain, REP, caffeinated
8717 Registered Users
Top Posters (30 Days)
The Wyrm 3
butchgo 2
FAUguy 2
kiwiaudio 1
Forum Stats
8,717 Registered Members
88 Forums
11,331 Topics
98,708 Posts

Most users ever online: 900 @ Today at 03:23 PM