Hey all,

Is there a bass management option to have the full range signal sent to FR and FL but have the derived bass signal from the center and surrounds sent to the sub? From reading the manual it seems like if the fronts are set to large they will always receive the derived bass signal. How low does the signal go for the 5 (of 5.1) normal speakers, can it really hit 20Hz or is anything below a certain level always contained in the .1 track?
Quote:
Select LFE to send the special Low Frequency Effects channel information
on multichannel digital sources to the subwoofer while a full range front
channel signal will be sent to the front Left/Right speakers along with
the derived bass signal from the other speaker positions.
Selecting L/R+Sub tells your receiver that you want bass signals sent to
your main L and R speakers in addition to your subwoofer. Choose this
option only if your main L and R speakers have good bass handling capability.
It may be the best selection for medium-sized front speakers.
Select NONE to send all bass information, including both LFE and
derived bass to the front left/right speakers.
I currently have my fronts set to large and center/surrounds set to small with a x-over of 60Hz and the sub set to LFE. I prefer this to the fronts set to small and a crossover of either 40, 60, or 80Hz. My front speaker specs. are +-2dB at 35Hz and have a sensitivty of 95dB.

Thanks,
-John