After Set-up with a mic | Model 990 Surround Processor | The Outlaw Saloon

You are not logged in. [Log In] Outlaw Homepage » Forums » Legacy Products » Model 990 Surround Processor » After Set-up with a mic

Topic Options

#62405 - 10/24/06 11:17 PM After Set-up with a mic
knownalien Gunslinger Registered: 10/23/05 Posts: 96	I have the latest firmware. I re-arranged my furniture and so figured I needed to re-run the speaker calibration again. Before the calibrations, the settings were fronts = large, center = small and surrounds = small. x-over was set at 40 hz, 60 hz and 60 hz respectively. After the white noise test, I get a message which basically says that there was a problem as my fronts are set to small and surrounds are set to large and to "switch" the two, power down, and re-run the calibration. what's up? _________________________ Outlaw 990 PreAmp Outlaw 7500 5 Channel Amp Two Outlaw 2200 M-Block Amps - for the Surrounds Oppo OPPO DV-981 Polk LSi15 Fronts Polk LSiC Center Polk LSi9 Surrounds SVS PC-Plus 20-39 (newest addition down to 16hz) Subwoofer Sony KDF-50WE655 50" LCD
Top

#62406 - 10/30/06 08:09 AM Re: After Set-up with a mic
barend Gunslinger Registered: 05/20/05 Posts: 112	To tell you the truth I stopped using these auto-EQ's after so many disappointments... A simple sound meter works better and with much less aggrevation!
Top

#62407 - 10/30/06 09:39 AM Re: After Set-up with a mic
WildWolf Gunslinger Registered: 10/19/06 Posts: 77 Loc: NorthEast	I got the same message....checked my settings and then ignored it. _________________________ Dedicated Theater: Outlaw 990, Outlaw 7200, Kef Q speakers, HSU sub, SVS sub, Sony Projector, Da-lite screen, Panasonic 500 BD, Panamax, Harmony 900 Bedroom: Sony 4es, Sonus Faber; Pioneer 5080; Aragon 8008X3, Marantz MA-500, Velodyne servo sub, Panasonic 55 bd; Panamax, Harmony One Livingroom: Onkyo TX-SR602, Vizio M70-C3, Atlantic Technology 5.1, Xbox one, Xbox 360, Playstation 4
Top

#62408 - 10/30/06 10:52 AM Re: After Set-up with a mic
Skyblazer Gunslinger Registered: 03/21/06 Posts: 255 Loc: Spokane, WA	set all your speakers to small.. and turn Defeat ON, and raise the crossover to 80 all around. that was the only way I could find that the auto calibration worked. after it's done. you can always go in and set your fronts to large again. _________________________ Outlaw Audio 990 pre amp Adire Audio sub (SVS 12.2 driver) CAL Alpha tube DAC Parasound P/HP-850 2 CH pre Pioneer PL-530 TT Polk Audio SDA 2B NAD 2600A amp Danger Boy here
Top

View All Topics

Hop To:

0 registered (), 223 Guests and 3 Spiders online.

Key: Admin, Global Mod, Mod

Newest Members

jamescuz, Zilla8d3, waferman, picnicjc, Hedoboy
8709 Registered Users

Top Posters (30 Days)

Forum Stats

8,709 Registered Members
88 Forums
11,327 Topics
98,693 Posts

Most users ever online: 476 @ 12/28/22 08:54 PM